Advertisement
--
--
--
Low Total Cost of Ownership
Thanks to its complex and robust build and
construction, the F80 series requires very little
maintenance and in-life servicing. There are no
user serviceable parts inside, and it does not
Black------
have any filters or other parts that need periodical
Grey------
replacement. That means it does not require a costly
White------
and high frequency maintenance contract. Similarly,
and compared to similarly performing Xenon high
Silver-------
power lamps, lamp replacement cost is low
typical lamp life is long. In total, a very cost effective
projector over time, resulting in a very low cost of
----
ownership.
* When replacing lamps, it is adviced to use only original
parts and accessories, as non original aftermarket lamps
may reduce performance, damage the projector, and void
warranties.
----
----
----
Low Frequency Maintenace programme
Our Low Frequency Maintenance programme can be set to automatically notify of required service and maintenace.
When run continuously, moving parts such as fans and colour wheels require periodic replacement in order to secure
and enable heavy duty, and continuous operation. With the F80, the shortest duty cycle of any one component – run
in full power mode, is as long as 8000 hours, meaning a full year's operation in 24/7 without any maintenance. Add hot
svwappable lamps to that, and you have a projector simply does not need to be turned off.
, and
*
Original lamp with projectiondesign optimised fixture mechanics.
Designed for full 24/7 operation
All projectiondesign professional projectors feature
full 24/7 operation warranties. That means they are
designed to operate continuously. There is no fine
ACOP
print. Designing for 24/7 operation requires a lot of
attention to detail. Some technologies are better
than others when it comes to withstand the abuse of
time. We use only components that have predictable
behaviours, for instance fans, colour wheel motors,
active
and electronic components that are designed by their
3D
respective manufacturers to do the same - withstand
time. There are no off-the-shelf components. That is
why we also closely monitor the creation of every detail,
stereo
apply dedicated thermal management, and use specific
materials in all parts of the process.
Changing lamps is easily done from the side of the projector.
Advertisement
