Honeywell Round T8700C Owner's Manual page 5

The following sequence uses the heating
program as an example. To change to the
cooling program, move the System switch to
the COOL position and enter the cooling
temperature settings.
To exit at any time, press
displayed.
1. Set current time.
a. Press
b. Press
To change the preprogrammed time/tempera-
ture settings, follow steps 2 through 6. If not,
press the key until End is displayed or the
thermostat will automatically return to normal
operational mode within five minutes.
until End is
.
PM
or to set current time.
2. Set WAKE TIME.
a. Press
b. Press
or
3. Set WAKE
TEMPERATURE.
a. Press
b. Press
WAKE temperature.
5
.
AM
to set desired WAKE time.
SET
AM
.
or to set desired
69-1099