Remote Control; Tape A/B - Aiwa CX-JN10 Service Manual

CX-JN10

Remote control

Refer to the pages indicated in parentheses for details.
Buttons with the same or similar names with the main
unit basically have the same function.
POWER
1-0/10, +10
CD: selects a CD track of the specified number.
Tuner: tunes in to the station with the specified preset
number.
The numbered buttons take on these functions below when
pressed with SHIFT held down
:
EDIT
Enters AI Edit Recording or Programmed Edit Recording
mode when pressed in stop mode.
BAND
Selects Tuner function and the radio band.
Setting the clock
Use the remote.
1 Press CLOCK/TIMER/SET.
Go to step 3 when the time appears and the 'hour' flashes.
2 Press r or t repeatedly until "CLOCK
SET" appears in the display and then press
ENTER.
3 Press r or t repeatedly to set the hour
and then press ENTER.
4 Press r or t repeatedly to set the minute
and then press ENTER.
The time display stops flashing and the clock starts from
00 seconds.
•MULTI JOG is also available in place of r or t.
8

TAPE A/B

TUNER MODE
Switches between stereo or monaural FM reception.
r, t
CD: selects a track.
Tuner: selects a preset station.
Tape: specifies tape length.
BASS and TREBLE: adjusts the level.
Clock and Timer: sets the time.
PLAY MODE
Selects Shuffle or Programmed playback in CD
function.
REPEAT
Enters CD repeat playback mode.
ENTER
CLOCK/TIMER/SET
Enters timer setting mode.
CLOCK/TIMER/SELECT
Selects timer playback, timer recording or timer off.
DISPLAY
Displays the time and the remaining time for CD.
SHIFT
Hold down when pressing a numbered button to change
its function to that printed above the number.
e.g.)
"Press SHIFT+BAND on the remote" indicates "Hold
down SHIFT and press '2' (BAND)". Doing so makes
you be able to select Tuner function and the radio band.
You can first press SHIFT, then a numbered button.
FUNCTION
Switches the active function among CD, TAPE, TUNER
and VIDEO (AUX or TV).
To display the time
Press DISPLAY on the remote. The time will be displayed for
6 seconds.
Tip: (Except AEP, UK models)
"AM 12:00" indicates midnight and "PM 12:00" noon.
If "- -:- -" appears when the unit is turned off
There has been a power interruption. Re-set the clock.
DISC SKIP
Select a disc.
c/d
When the unit is turned off: activates or deactivates
DEMO.
CD and Tape: starts playback.
s
CD and Tape: stops playback.
f,g
CD: searches a track in fast forward or fast reverse
playback when held down.
Tape: fast forwards or rewinds the tape.
Tuner: manually tunes down or up within the band.
a
CD and Tape: pauses playback.
SLEEP
Switches the sleep-timer on/off and selects the
duration.
VOLUME (+, -)
Adjusts the volume.
SOUND
Selects BASS or TREBLE setting mode
CLEAR
Clears a track of the CD programmed playback and a
Radio preset station.
The buttons not explained above (ALBUM N, M,
SPECTRUM and KARAOKE) do not operate for this
unit.