Conversion To Lp Gas - LG LCG3091ST Service Manual

Test 2:
• With the burner on a "LOW" setting, open and close the oven or cabinet door quickly.
• If the flame is extinguished by the air currents created by the door movement, increase the
flame height and test again.
N. After low flame setting, turn off the burner.
O. Disconnected power to appliance.
P. Remove the cooktop plate.(See "Cooktop Plate".)
Q. Reposition center LED lamp module by hooking.
R. Reposition cook top and secure all screws of cook top.
S. Reposition burner heads, burner caps, grates and knobs.
T. Connect power to appliance.
4. CONVERSION STICKER
Upon completion of conversion, fill out the LP sticker located with the instructions. Once
complete, apply the sticker to the back of the cooktop near the regulator. If converting back to
the natural gas from LP, remove the LP sticker from the back of the cooktop.
To convert to the original gas.
Follow conversion process with original orifices to convert the appliance to the original gas.
Copyright © 2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes

CONVERSION TO LP GAS

-46-
LGE Internal Use Only