Inlet Pipe Assembly - LG LCG3091ST Service Manual

Inlet Pipe Assembly

WARNING
• DISCONNECT power supply before servicing.
• SHUT OFF gas supply to the cooktop before
sevicing.
• Replace all panels and parts before
operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal injury, death
or electrical shock.
CAUTION
• Be careful when you work on the Cooktop
handling the sheet metal part.
1. Remove the cooktop plate.(See "Cooktop Plate".)
11
2. Unfasten the / -in. Nut from the inlet pipe assembly.
16
3. Unfasten the 4 screws.
When replacing this part with new one, progress reversely.
Copyright © 2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
COMPONENT REPLACEMENT
11
/ -in. Open-End Wrench
16
11
/ -in. Nut
16
Manifold Pipe
Phillips Head Screw
Inlet Pipe Assembly
4. Lift the inlet pipe assembly
-40-
LGE Internal Use Only