Burner Pipe Assembly - LG LCG3091ST Service Manual

Burner Pipe Assembly

WARNING
• DISCONNECT power supply before servicing.
• SHUT OFF gas supply to the cooktop before
sevicing.
• Replace all panels and parts before
operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal injury, death
or electrical shock.
CAUTION
• Be careful when you work on the Cooktop
handling the sheet metal part.
1. Remove the cooktop plate.(See "Cooktop Plate".)
1
2. Remove the / inch tubing fittings from the burner gas housing.
2
Left Front Burner Body
1
/ -in. Nut
2 1
/ -in.
2
Open-End Wrench
3. Remove the tubing fittings from the gas valve.
Left Front Burner Valve
Burner Valve
4. Lift the burner pipe assembly.
When replacing this part with new one, progress reversely.
LGE Internal Use Only
COMPONENT REPLACEMENT
Left Rear Burner Body
1
1
/ -in. Nut
/ -in.
2
2
Open-End Wrench
Left Rear Burner Valve
1
-in. Nut
/
2
LR Burner Pipe
LF Burner Pipe
Right Front Burner Body
1
/ -in. Nut
2
1
/ -in.
2
Open-End Wrench
Right Front Burner Valve
1
-in. Open-End Wrench
/
2
Pipe(Tube)
Copyright © 2009 LG Electronics. Inc. All right reserved.
-37-
Only for training and service purposes
RR Burner Pipe
RF Burner Pipe
Right Rear Burner Body
1
/ -in. Nut
2
1
/ -in.
2
Open-End Wrench
Right Rear Burner Valve