Synchronising With Your Computer - High Tech Computer Pocket PC Phone User Manual

4.4 Synchronising with Your Computer

Connect your device to the PC using the USB cable, infrared, or Bluetooth
connection. Windows Mobile Device Centre or ActiveSync then opens and
lets you synchronise.
Tip
If you are synchronising directly with Exchange Server, you can use
this connection to the PC to "pass through" to the network, or you can
synchronise without connecting to the PC over a cellular network. For more
information on synchronising with the Exchange Server, see "Synchronising
with Exchange Server" later in this chapter.
Start and stop synchronisation
You can manually synchronise either from your device or PC.
From your device
1. Tap Start > Programs > ActiveSync.
2. Tap Sync.
To end synchronisation before it completes, tap Stop.
From Windows Mobile Device Centre
1. Tap Start > Windows Mobile Device Centre.
2.
Tap
To end synchronisation before it completes, tap
From ActiveSync on your PC
When you connect your device to your PC, ActiveSync automatically opens
on your PC and synchronises.
•
To manually start synchronisation, tap
•
To end synchronisation before it completes, tap
Change which information is synchronised
You can change the information types and the amount of information to
synchronise for each type either from your device or your PC. Follow the
steps below to change synchronisation settings from your device.
Note
Before changing synchronisation settings on your device, disconnect it from
your PC.
at the lower left of the Windows Mobile Device Centre.
Synchronising Information 59
.
.
.