Using Block Recognizer; Using Transcriber - High Tech Computer Pocket PC Phone User Manual

38 Entering and Searching Information

2.4 Using Block Recognizer

With Block Recognizer, you use a single stroke to write letters, numbers,
symbols, and punctuation, which are then converted into typed text.
To use Block Recognizer
1. From a programme, tap the Input Selector arrow, and tap Block
Recognizer.
2.
Write characters, numbers, and symbols in the designated writing
area.
•
•
•
Note
Tip

2.5 Using Transcriber

Transcriber is a handwriting recognition programme that allows you
to write in cursive, print, or a combination of both. Transcriber works
transparently in the background of programmes, recognising words
with its integrated dictionary. When Transcriber is turned on, it interprets
stylus movement anywhere on the screen as handwriting input. For more
information about using Transcriber, see Help on your device.
To start Transcriber
1.
Start a programme that accepts user input, such as Word Mobile.
2. Tap the Input Selector arrow, and tap Transcriber. The Transcriber
introductory screen appears.
Enter letters by writing in the abc (left) area of the box.
Enter numbers by writing in the 123 (right) area of the box.
Enter symbols and punctuation by tapping in either area of the
box and then writing the desired character.
Block Recognizer is available when text entry is possible.
For help with writing characters with Block Recognizer, tap the question
mark near the writing area.