Kickstarter; Foot Brake Pedal; Plugin- Stand; Compression Damping Of Fork - KTM 85 SX 2003 Owner's Manual

Kickstarter

The kickstarter is mounted on the right side of the engine. Its upper part
can be swivelled.

Foot brake pedal

The foot brake pedal is located in front of the right foot rest. Its basic posi-
tion can be adjusted to your seat position (see maintenance work).
8

Plugin- Stand

1
The plug-in stand included in the scope of supply can be plugged into
the left side of the bike at the end of the swinging fork.
1

Compression damping of fork

Hydraulic compression damping determines the reaction when the fork is
compressed. The degree of compression can be adjusted with adjusting
screws at the bottom of the fork legs.Remove the protecting cap.
2
Turn the knob clockwise to increase damping, turn it counterclockwise to
reduce damping during compression.
STANDARD ADJUSTMENT
– turn adjusting screw clockwise as far as it will go
– turn it back by as many clicks as are specified for the relevant type of fork
Typ White Power 0518Y733 ...............20 clicks
2
2

Rebound damping of fork

Hydraulic rebound damping determines the reaction when the fork is
3
3
3
rebound. By turning the adjusting screw (REB), the degree of damping of
the rebound can be adjusted. Turn the knob clockwise to increase damping,
turn it counterclockwise to reduce damping during rebounding.
STANDARD ADJUSTMENT
– turn adjusting screw clockwise as far as it will go
– turn it back by as many clicks as are specified for the relevant type of fork
Typ White Power 0518Y733 ...............20 clicks