Honeywell RTH7600 Series Quick Installation Manual page 19

About your new thermostat System setup
See page 14 to navigate between functions.
Function
0180 Heating Fan
Control
0190 Heat Pump
Changeover
Valve (for heat
pumps only)
Settings & Options
Press to select your heating
s/t
system & fan control:
0 Gas or oil heat: Use this
setting if you have a gas or
oil heating system (system
controls fan operation).
1 Electric heat: Use this setting
if you have an electric heating
system (thermostat controls fan
operation).
Press to select whether your
s/t
changeover valve is used in heating
or cooling:
0 Cooling changeover valve:
Use this setting if you con-
nected a wire labeled "O" to
the O/B terminal (see page 22).
1 Heating changeover valve:
Use this setting if you con-
nected a wire labeled "B" to the
O/B terminal (see page 23).
1
RTH600
69-2206EF—01