SOFTENER DISPENSER
This is the device to dispense the softener automatically by centrifugal force.
This is installed inside the auto-balancer.
FUNCTIONAL PRINCIPLE
1) Softener stays in room (A) when poured into softener inlet.
2) Softener moves from (A) to (B) by centrifugal force during intermittent spin process.
3) Softener flows from (B) to (C) during rinse process next to intermittent spin.
4) Softener moves from (C) to (D) by centrifugal force during second intermittent spin.
After spin process is finished, the softener is added into the tub through softener outlet.
FLOW OF THE SOFTENER
Wash
Wash
Normal
Course
(A)
FLOW OF THE SOFTENER INSIDE OF THE BALANCER
Room inside
the balancer
Centrifugal force
Flowing by
weight
NOTE: Softener moves into the next room when r.p.m. of the tub is more than 100 r.p.m.
HOW TO CHECK MOVEMENT
Pour a reasonable amount of "MILK" into softener
dispenser and operate the washer with no load. In final
rinse cycle, make sure that the milk is added into the
tub through softener outlet.
5
Intermittent
Intermittent
Spin
Spin
Centrifugal
force
(B)
A
B
C
Hold
Hold
Intermittent
Intermittent
Spin
Spin
Flow in
Centrifugal
force
(C)
(D)
D
Balancer
Softener inlet
Rinse
Rinse
Flow in
Softener
outlet
B
D
A
C
Spin
Spin