Specifications - Pioneer KEH-P8010R Service Manual

KEH-P8010R,P8015

8.2 SPECIFICATIONS

- KEH-P8010R/X1N/EW
General
Power source .......... 14.4 V DC (10.8 – 15.1 V allowable)
Grounding system ........................................ Negative type
Max. current consumption ...................................... 10.0 A
Dimensions
(mounting size) ...... 178 (W) 50 (H) 157 (D) mm
(front face) .............. 188 (W) 58 (H) 19 (D) mm
Weight ...................................................................... 1.3 kg
Backup current .......................................... Less than 5 mA
Amplifier
Maximum power output ...................................... 50 W 4
50 W 2 ch/4
Continuous power output .................................... 27 W 4
Load impedance
...................... 4
Preout maximum output level/output impedance
.................................................................. 2.2 V/1 k
Equalizer (3-Band Parametric Equalizer)
(Low) .......................... Frequency: 40/80/100/160 Hz
(Mid) .......................... Frequency: 200/500/1k/2k Hz
(High) ................ Frequency: 3.15k/8k/10k/12.5k Hz
Loudness contour
(Low) .................. +3.5 dB (100 Hz), +3 dB (10 kHz)
(Mid) ................ +10 dB (100 Hz), +6.5 dB (10 kHz)
(High) ................ +11 dB (100 Hz), +11 dB (10 kHz)
Tone controls
(Bass) .......................... Frequency: 40/63/100/160 Hz
(Treble) .................. Frequency: 2.5k/4k/6.3k/10k Hz
HPF
Frequency ............................................ 50/80/125 Hz
Slope ........................................................ –12 dB/oct.
Subwoofer output
Frequency ............................................ 50/80/125 Hz
Slope ........................................................ –18 dB/oct.
Gain ................................................................ ±12 dB
Phase.................................................. Normal/Reverse
68
70 W 1 ch/2 (for Subwoofer)
25 W 4 (BRI)
(DIN45324, +B = 14.4 V)
(4 – 8 [2 for 1 ch] allowable)
Q Factor: 0.35/0.59/0.95/1.15
(+6 dB when boosted)
Gain: ±12 dB
Q Factor: 0.35/0.59/0.95/1.15
(+6 dB when boosted)
Gain: ±12 dB
Q Factor: 0.35/0.59/0.95/1.15
(+6 dB when boosted)
Gain: ±12 dB
(volume: –30 dB)
Gain: ±12 dB
Gain: ±12 dB
Cassette player
Tape ........................ Compact cassette tape (C-30 – C-90)
Tape speed .... 4.76 cm/sec. (+0.14 cm/sec., -0.05 cm/sec.)
Fast forward/rewinding time .... Approx. 100 sec. for C-60
Wow & flutter .......................................... 0.09% (WRMS)
Frequency response .......... Metal: 30 – 19,000 Hz (±3 dB)
Stereo separation ...................................................... 45 dB
Signal-to-noise ratio
........ Metal: Dolby B NR IN: 67 dB (IEC-A network)
Dolby NR OUT: 61 dB (IEC-A network)
FM tuner
Frequency range ...................................... 87.5 – 108 MHz
Usable sensitivity........................................................ 9 dBf
(0.8 V/75 , mono, S/N: 30 dB)
50 dB quieting sensitivity ........................................ 15 dBf
(1.5 V/75 , mono)
Signal-to-noise ratio ...................... 70 dB (IEC-A network)
Distortion .......................... 0.3% (at 65 dBf, 1 kHz, stereo)
Frequency response ...................... 30 – 15,000 Hz (±3 dB)
Stereo separation .......................... 40 dB (at 65 dBf, 1 kHz)
MW tuner
Frequency range ........................ 531 – 1,602 kHz (9 kHz)
Usable sensitivity .............................. 18 V (S/N: 20 dB)
Selectivity .................................................. 50 dB (±9 kHz)
LW tuner
Frequency range ........................................ 153 – 281 kHz
Usable sensitivity .............................. 30 V (S/N: 20 dB)
Selectivity .................................................. 50 dB (±9 kHz)
Note:
• Specifications and the design are subject to possi-
ble modification without notice due to improve-
ments.