Multi-cd control high power cassette player with rds tuner (53 pages)
Summary of Contents for Pioneer KEH-P8900R
Page 1
Multi-CD/MD/DAB control High power Cassette player with RDS tuner Reproductor de Cassette de alta potencia con control de múltiples CD/MD/DAB con sintonizador RDS Operation Manual KEH-P8900R KEH-P8900R-W Manual de Operación...
Contents Key Finder ............ 3 Tuner Operation ........24 Head Unit Local Seek Tuning (LOCAL) Steering Remote Controller Best Stations Memory (Best Stations Memory) Before Using This Product ...... 5 Using the RDS Functions ......25 About This Product .......... 5 About This Manual ..........
Page 3
Audio Adjustment ........43 RFP Alert Function ........58 Selecting the Equalizer Curve ......43 Activating the RFP Alert Feature ....58 Entering the Audio Menu ........ 43 Setting Entry Delay Time ........ 58 Audio Menu Functions ........44 Activating Internal Speaker ON/OFF .... 59 Balance Adjustment (FAD/BAL) Speaker Volume Output Adjustment Equalizer Curve Adjustment (Equaliz...
Key Finder Head Unit RESET button DISPLAY button FUNCTION button EJECT button 5/∞/2/3 buttons ENTERTAINMENT button EQ selector Buttons 1–6 BAND button +/– button PGM button PTY button SOURCE/OFF button AUDIO button TA button...
Steering Remote Controller A steering remote controller that enables remote operation of the head unit is supplied. Operation is the same as when using buttons on the head unit. ATT button This lets you quickly lower volume level (by about 90%). Press once more to return to the original volume level.
Before Using This Product About This Product • This product complies with the EMC Directives (89/336/EEC, 92/31/EEC) and CE Marking Directive (93/68/EEC). The tuner frequencies on this product are allocated for use in Western Europe, Asia, the Middle East, Africa and Oceania. Use in other areas may result in improper reception. The RDS function operates only in areas with FM stations broadcasting RDS signals.
About the Demo Mode This product features two demonstration modes. One is the Reverse Demo mode, the other is the Feature Demo mode. Reverse Demo If you do not perform an operation within about 30 seconds, screen indications start to reverse, and then continue reversing every 10 seconds.
Before Using This Product When using the DAB (Digital Audio Broadcasting) Tuner You can use this product with a separately sold hide-away DAB tuner (GEX-P900DAB, GEX-P900DABII). For details concerning operation, refer to the DAB Tuner’s Operation Manuals. This section provides information on DAB operations with this product which differs from that described in the DAB Tuner’s Operation Manual.
Operation With this product, operation of the following four functions differs. (Reference pages are in the Hide-away DAB Tuner’s Operation Manual.) • Changing the Label (Refer to page 12.) • Changing Display Indications (Refer to page 13.) • Operating Announcements with Function Menu (Refer to page 19.) •...
Page 10
Before Using This Product 7 Service List Function This product is also equipped with the Service List Function in the Function Menu. It is possible to select the desired Service among the memorized Services in the Service List. Function Menu Functions appear on the display in the following order: Service List (SRVC.
Precaution • The Pioneer CarStereo-Pass is for use only in Germany. • Keep this manual handy as a reference for operating procedures and precautions. • Always keep the volume low enough for outside sounds to be audible. • Protect the product from moisture.
Remote Controller and Care Using the Steering Remote Controller Precaution: • Do not operate this unit while manipulating the steering wheel as it might result in a traffic acci- dent. • If you have to operate this unit unavoidably when driving, look ahead carefully to avoid the risk of being involved in a traffic accident.
Battery 7 Install the Lithium Battery • Remove the cover on the back of the steering remote controller and insert the battery with the (+) and (–) poles pointing in the proper direction. 7 Replacing the Lithium Battery • Remove the lithium battery. Precaution: •...
= Multi-MD player = Multi-CD player = External Unit = AUX Note: • External Unit refers to a Pioneer product (such as one available in the future) that, although incom- patible as a source, enables control of basic functions by this product. Only one External Unit can be controlled by this product.
Basic Operation of Tuner This product’s AF function can be switched ON and OFF. AF should be switched OFF for normal tuning operations. (Refer to page 26.) Manual and Seek Tuning • You can select the tuning method by changing the length of time you press the 2/3 button.
Basic Operation Basic Operation of Cassette Player Note: • Be sure to close the front panel after loading or ejecting a cassette. Eject Press the EJECT button, and you can open the front panel before ejection. In case of opening the front panel, you can just eject a cassette tape. Note: •...
Fast Forward/Rewind and Music Search • Each press of the 3 button selects Fast Forward or Forward-Music Search. Fast Forward = FF M-Search (Forward-Music Search) = Normal Playback • Each press of the 2 button selects Rewind-Music Search. Rewind = REW M-Search (Rewind-Music Search) = Normal Playback Note: •...
Basic Operation Basic Operation of Multi-CD Player This product can control a Multi-CD player (sold separately). Track Search and Fast Forward/Reverse Switching the Display Each press of the DISPLAY • You can select between Track Search or Fast button changes the display Forward/Reverse by pressing the 2/3 button in the following order: for a different length of time.
Disc Number Search (for 6-Disc, 12-Disc types) • You can select discs directly with the 1 to 6 buttons. Just press the number corresponding to the disc you want to listen to. Note: • When a 12-Disc Multi-CD Player is connected and you want to select disc 7 to 12, press the 1 to 6 buttons for 2 seconds.
Basic Operation Corresponding Display Indications and Buttons This product’s display features Key Guidance Indicators. These light to indicate which of the 5/∞/2/3 buttons you can use. When you’re in the Function Menu (refer to next sec- tion), Detailed Setting Menu (refer to page 22), Initial Setting Menu (refer to page 53) or Audio Menu (refer to page 43), they also make it easy to see which 5/∞/2/3 buttons you can use to switch functions ON/OFF, switch repeat selections and perform other opera- tions.
Page 21
2. Operate a mode. (e.g. Repeat Play) The button used and the operation it performs are indicated by the key guidance indicator. Press the 5 button to switch the key guidance indicator ON, and the ∞ button to switch it OFF. 3.
Page 22
Basic Operation 7 Cassette Player Function name (Display) Button: Operation Page 5: ON Repeat Play (Repeat) ∞: OFF 5: ON Scan Play (Scan Play) ∞: OFF 5: ON Blank Skip (Blank Skip) ∞: OFF Radio Intercept and CD Intercept (Intercept) 2 or 3: Select 3: ON Dolby B NR (Dolby B NR) 2: OFF...
Entering the Detailed Setting Menu In the Detailed Setting Menu, you can operate convenient, complex functions for each source. 1. Enter the Detailed Setting Menu. Hold for 2 seconds 2. Select the desired mode. (Refer to next section, “Detailed Setting Menu Functions”.) Each press changes the Mode ...
Basic Operation Detailed Setting Menu Functions The following chart shows functions for each source in the Detailed Setting Menu. The chart also shows indications for each function, operations and buttons used to perform operations. For more details, or when you want to know about an operation, refer to the page number indicated in the chart.
Tuner Operation Local Seek Tuning (LOCAL) When Local mode is ON (“LOC” indicator lights), you can only select broadcast stations providing strong reception. 1. Press the FUNCTION button and select the Local mode (LOCAL) in the Function Menu. 2. Switch the Local ON/OFF with the 5/∞...
Using the RDS Functions What is RDS? RDS (Radio Data System) is a system for transmitting data along with FM programs. This data, which is inaudible, provides a variety of features such as: program service name, pro- gram type display, traffic announcement standby, automatic tuning and program type tun- ing, intended to aid radio listeners in tuning to a desired station.
AF Function (AlternativeFrequency) The AF (Alternative Frequencies search) function is used to search for other frequencies in the same network as the currently tuned station. It automatically retunes the receiver to another frequency in the network which is broadcasting a stronger signal when there are problems with reception of the currently tuned station or better reception is possible on a different frequency.
Using the RDS Functions PI Seek Function The tuner searches for another frequency broadcasting the same programming. “PI Seek” appears on the display and the radio volume is muted during a PI Seek. The muting is discon- tinued after completion of the PI Seek, whether or not the PI seek has succeeded. If the PI Seek is unsuccessful, the tuner returns to the previous frequency.
Traffic Announcement Standby Function (Traffic Announcement) The TA (Traffic Announcement standby) function lets you receive traffic announcements automatically, no matter what source you are listening to. The TA function can be activat- ed for either a TP station (a station that broadcasts traffic information) or an EON TP sta- tion (a station carrying information which cross-references TP stations).
Using the RDS Functions Canceling Traffic Announcements • Press the TA button while a traffic announcement is being received to cancel the announcement and return to the original source. The announcement is canceled but the tuner remains in the TA mode until the TA button is pressed again.
PTY Function With Wide and Narrow classification of program type, the PTY function provides two ways to select stations by the type of program being broadcast (PTY Search). It also pro- vides automatic tuning to emergency broadcasts (PTY Alarm). Note: •...
Using the RDS Functions News Program Interruption Setting (News) You can switch automatic reception of PTY code news programs ON/OFF. When a received news program ends, reception of the previous program resumes. • Set interruption to ON or OFF. Hold for 2 seconds “NEWS”...
PTY Alarm PTY Alarm is a special PTY code for announcements regarding emergencies such as nat- ural disasters. When the tuner receives the radio alarm code, “ALARM” appears on the display and the volume adjusts to the TA volume. When the station stops broadcasting the emergency announcement, the system returns to the previous source.
Using the RDS Functions PTY List Wide Narrow Details News&Inf News News. Affairs Current affairs. Info General information and advice. Sport Sports programs. Weather Weather reports/Meteorological information. Finance Stock market reports, commerce, trading, etc. Popular Pop Mus Popular music. Rock Mus Contemporary modern music.
Using the Cassette Player Repeat Play (Repeat) The repeat mode lets you hear the same song over again. 1. Press the FUNCTION button and select the Repeat mode (Repeat) in the Function Menu. 2. Switch the Repeat Play ON/OFF with the 5/∞ but- tons.
Using the Cassette Player Radio Intercept and CD Intercept (Intercept) 7 Radio Intercept (“RADIO I” indicator lights) This function allows you to listen to the radio during tape fast-forwarding/rewinding. 7 CD Intercept (“CD I” indicator lights) This function only works when an optional Multi-CD player is used with this product. This function allows you to listen to the CD during tape fast-forwarding/rewinding.
Using Multi-CD Players Repeat Play (Play Mode) There are three repeat play ranges: One-track Repeat, Disc Repeat and Multi-CD player Repeat. Default repeat play range is Multi-CD player Repeat. 1. Press the FUNCTION button and select the Repeat selecting mode (Play Mode) in the Function Menu.
Using Multi-CD Players Scan Play (Scan Play) In the Disc Repeat, the beginning of each track on the selected disc is scanned for about 10 seconds. In the Multi-CD player Repeat, the beginning of the first track on each disc is scanned for about 10 seconds.
Pause (Pause) Pause pauses the currently playing track. 1. Press the FUNCTION button and select the Pause mode (Pause) in the Function Menu. 2. Switch the Pause ON/OFF with the 5/∞ buttons. Compression and DBE (Compression) Using the Comp. (Compression) and DBE (Dynamic Bass Emphasis) functions enables Multi-CD player sound quality adjustment.
Using Multi-CD Players ITS (Instant Track Selection) The ITS function allows you to search for the track you wish to play when a Multi-CD player is installed. You can use ITS to program automatic playback of up to 24 tracks per disc from up to 100 discs.
Erase a Track Program 1. Select the track you wish to erase, during ITS Play. 2. Select the ITS Programming mode (ITS Memory) in the Detailed Setting Menu. (Refer to page 22.) 3. Erase the track program with the ∞ button. ITS is canceled and playback of the next ITS-programmed track begins.
Using Multi-CD Players Disc Title Disc Title Input (Title Input ABC) You can input Titles up to 10 letters long for up to 100 discs. Using this function lets you easily search for and select a desired disc for play. (You can store ITS program and Disc Title data for up to 100 discs in memory.) 1.
Selecting Discs by Disc Title List (Disc List) Every 6 discs are displayed. You can scroll the display. Follow the procedures below to play a disc for which you have input the title in a Multi- CD player or a CD TEXT disc on a CD TEXT compatible Multi-CD player. 1.
Audio Adjustment Selecting the Equalizer Curve You can switch between Equalizer curves. • Rotate the EQ selector up or down to select the desired Equalizer curve. “CUSTOM” POWERFUL + = NATURAL + = VOCAL + = CUSTOM + = FLAT + = SUPER BASS Note: •...
Audio Menu Functions The Audio Menu features the following functions. Balance Adjustment (FAD/BAL) This function allows you to select a Fader/Balance setting that provides ideal listening con- ditions in all occupied seats. 1. Press the AUDIO button and select the Fader/Balance mode (FAD/BAL) in the Audio Menu.
Audio Adjustment Equalizer Curve Fine Adjustment (Equaliz You can adjust the center frequency and the Q factor (curve characteristics) of each cur- rently selected curve band (LOW BAND/MID BAND/HIGH BAND). Adjusted equalizer curve settings are memorized in “CUSTOM”. Level (dB) Q=2W Q=2N Frequency (Hz)
Loudness Adjustment (Loudn The Loudness function compensates for deficiencies in the low and high sound ranges at low volume. You can select a desired Loudness level. 1. Press the AUDIO button and select the Loudness mode (Loudn ss) in the Audio Menu.
Audio Adjustment Subwoofer Setting Adjustment (Sub W-2) When the Subwoofer output is ON, you can adjust the cut-off frequency and the output level of Subwoofer. 1. Press the AUDIO button and select the Subwoofer setting mode (Sub W-2) in the Audio Menu. 2.
Non-Fading Output Level Adjustment (Non Fad When the Non-Fading output is ON, you can adjust the level of Non-Fading output. 1. Press the AUDIO button and select the Non-Fading Output setting mode (Non Fad -2) in the Audio Menu. 2. Increase or decrease the output level with the 5/∞...
Audio Adjustment Front Image Enhancer Function (FIE) The F.I.E. (Front Image Enhancer) function is a simple method of enhancing front imaging by cutting mid- and high-range frequency output from the rear speakers, limiting their out- put to low-range frequencies. You can select the frequency you want to cut. Precaution: •...
Source Level Adjustment (SLA) Function The SLA (Source Level Adjustment) function prevents radical leaps in volume level when switching between sources. Settings are based on the FM volume level, which remains unchanged. 1. Compare the FM volume with the volume of the other source. (e.g.
Detaching and Replacing the Front Panel Theft Protection The front panel of the head unit is detachable to discourage theft. Precaution: • Never use force or grip the display tightly when removing or replacing the front panel. • Avoid subjecting the front panel to excessive shocks. •...
Replacing the Front Panel 1. Make sure the inner cover is closed. 2. Replace the front panel by clipping it into place. Warning Tone If the front panel is not detached within 5 seconds after the ignition is turned off, a warning tone will sound.
Initial Setting Entering the Initial Setting Menu With this menu, you can perform initial settings for the product. 1. Switch the sources OFF. 2. Enter the Initial Setting Menu. Hold for 2 seconds 3. Select the desired mode. Each press changes the Mode ... 4.
Initial Setting Menu Functions The Initial Setting Menu features the following functions. Changing the FM Tuning Step (FM tuning step) Normally set at 50 kHz during Seek tuning in the FM mode, the tuning step changes to 100 kHz when the AF or TA mode is activated. It may be preferable to set tuning step to 50 kHz in the AF mode.
Initial Setting Switching the Auto PI Seek (Auto PI Seek) During Preset Station PI Seek operation, you can switch the Auto PI Seek function ON/OFF. (Refer to “PI Seek Function” on page 27.) 1. Press the FUNCTION button and select the Auto PI Seek mode (Auto PI Seek) in the Initial Setting Menu.
Switching the Rear Speaker Output (Rear Speaker Out) This product’s rear speaker leads can be used for full-range speaker (“Full Range output”) or Subwoofer (“Sub woofer output”) connection. If you switch Rear Speaker Lead setting to the “Sub woofer output”, you can connect a rear speaker lead directly to a Subwoofer without using an auxiliary amp.
Initial Setting Setting the Dimmer (Dimmer) To enable this product’s display from being too bright at night, when the vehicle’s head lights are turned ON the display is dimmed. You can switch this function ON/OFF. 1. Press the FUNCTION button and select the Dimmer mode (Dimmer) in the Initial Setting Menu.
Activating the RFP Alert Feature Pioneer has developed a menu display that allows you to set-up your RFP Alert to meet your personal needs. By scrolling through this menu it is possible to select your own “Entry Delay Time”, “Speaker Output Volume”...
RFP Alert Function Activating Internal Speaker ON/OFF This feature allows you to select whether or not the speaker output is sounded when the “RFP Alert” is triggered. Initially from the factory the speaker output is activated. Toggling between 5, ∞ buttons allows you to deactivate or activate the “Speaker Output”. If you switch the speaker output OFF, you cannot change the “Test Mode”.
Selecting Door Switching Systems It is necessary to select the correct “Door System Type” (Negative or Positive switching) for that of your vehicle. Initially, the system is set for vehicles with the grounding type (Negative switching). Select the correct “Door System Type” of your vehicle from below. 7 Vehicles to select “Door System: 7 Vehicles to select “Door System: Negative, Current mode: Close”...
Upon entering your vehicle, and within the “Entry Delay Time” set within the “RFP Alert Menu”, attach your Pioneer Front Panel as described on page 52. If you have forgotten your removable front panel, simply insert the ignition key in the igni-...
Entry Detection If the “RFP Alert” was not disarmed in accordance with “Disarming Alert”, the “RFP Alert” will be triggered. The “RFP Alert” will sound for 60 seconds and will repeat 5 times if any door is left open or reopened. After the fifth time the “RFP Alert” will reset to pre- vent continuous sounding and prevent your battery from discharging.
Other Functions Switching the Entertainment Display You can change the display to the movie screens, etc. while listening to each source. (e.g. MOVIE SCREEN MODE 1) • Select the desired Entertainment Display. Each press changes the Display ... Each press of the ENTERTAINMENT button changes the display in the following order: LEVEL INDICATOR = MOVIE SCREEN MODE 1 = MOVIE SCREEN MODE 2 = Display before entering the Entertainment Display...
Using the PGM Button (Program Function) The PGM button can memorize one of the functions in the Function Menu. It is possible to memorize a different function for each source. Setting the PGM Button 1. Select the PGM button’s setting mode (Program Function) in the Detailed Setting Menu.
Others Functions Using the PGM Button The PGM button operates in a different way depending on the function programmed (memorized). • Use the PGM button. 7 Tuner Function Name (Display) Press Hold for 2 seconds Best Stations Memory (BSM) Regional Function (Regional) ON/OFF –––––...
Using the AUX Source It is possible to use auxiliary (AUX) equipment with this product. To listen to auxiliary equipment, switch the AUX Mode in the Initial Setting Menu ON, and then select the desired source. Selecting the AUX Source •...
Cassette Player and Care Precaution About the Cassette Player • A loose or warped label on a cassette tape may interfere with the eject mechanism of the unit or cause the cassette to become jammed in the unit. Avoid using such tapes or remove such labels from the cassette before attempting use.
Specifications General Cassette player Power source ..14.4 V DC (10.8 – 15.1 V allowable) Tape ......Compact cassette tape (C-30 – C-90) Grounding system ........Negative type Tape speed ............4.8 cm/sec. Max. current consumption ........10.0 A Fast forward/rewinding time ..Approx. 100 sec. for C-60 Dimensions Wow &...
Page 70
Contenido Guía de botones ........3 Visualizaciones y botones correspondientes ........19 Unidad principal Selección del menú de funciones ....19 Controlador remoto de volante Funciones del menú de funciones ....20 Selección del menú de ajustes detallados ..22 Antes de usar este producto ....
Page 71
Uso de reproductores de Multi-CD ..36 Ajustes iniciales ........53 Reproducción con repetición (Play Mode) Selección del menú de ajustes iniciales ..53 Reproducción aleatoria (RandomPlay) Funciones del menú de ajustes iniciales ..54 Reproducción con exploración Cambio del paso de sintonía de FM (Scan Play) (FM tuning step) Pausa (Pause)
Controlador remoto de volante Se suministra un controlador remoto de volante que permite la operación a distancia de la unidad principal. La operación es la misma que cuando se usan los botones en la unidad principal. Botón ATT Este botón le permite bajar el nivel del volumen rápidamente (aproximadamente 90%).
Antes de usar este producto Sobre este producto • Este producto cumple con las Directivas EMC (89/336/CEE, 92/31/CEE) y Directiva de Marcación CE (93/68/CEE). Las frecuencias del sintonizador en este producto se han dispuesto para usar en Europa Occidental, Asia, Oriente Medio, Africa y Oceanía. El uso en otras áreas puede resultar en una recepción inapropiada.
Acerca del modo de demostración Este producto presenta dos modos de demostraciones. Uno es el modo de demostración de retroceso el otro es el modo de demostración de característica. Demostración de retroceso Si no realiza ninguna operación dentro de 30 segundos, las indicaciones de la pantalla comienzan a retroceder, y luego continúan retrocediendo cada 10 segundos.
Antes de usar este producto Cuando se usa el sintonizador DAB (Emisión de audio digital) Se puede utilizar este producto con un sintonizador DAB oculto vendido separadamente (GEX-P900DAB, GEX-P900DABII). Para los detalles acerca de la operación, consulte el manual de instrucciones del sintonizador DAB. Esta sección proporciona información sobre las operaciones DAB con este producto que difieren de los descritos en el manual de operación del sintonizador DAB.
Operación Con este producto, la operación de las siguientes cuatro funciones difiere. (Refiérase a las páginas en el manual de operación del sintonizador DAB oculto-alejado.) • Cambio de etiqueta (Vea la página 12.) • Cambio de visualizaciones (Vea la página 13.) •...
Page 78
Antes de usar este producto 7 Función de lista de servicios Este producto también se equipa con la función de lista de servicios en el menú de fun- ciones. Es posible seleccionar el servicio deseado entre los servicios memorizados en la lista de servicios.
Precaución • El Pioneer CarStereo-Pass es para usar solamente en Alemania. • Guarde este manual a mano como referencia para los procedimientos de operación y precauciones. • Mantenga siempre el volumen bajo lo suficiente para oír los sonidos de tráfico.
Controlador remoto y cuidado Uso del controlador remoto de volante Precaución: • No opere esta unidad mientras maneja el volante, o podría resultar en un accidente de tráfico. • En el caso de que inevitablemente opere esta unidad mientras conduce, mire hacia adelante cuida- dosamente.
Pila 7 Instale la pila de litio • Retire la cubierta en la parte trasera del controlador remoto de volante e inserte la pila con los polos (+) y (–) orientados en la dirección apropiada. 7 Para cambiar la pila de litio •...
= Reproductor Multi-MD = Reproductor Multi-CD = Unidad externa = AUX Nota: • Unidad externa refiérese a un producto Pioneer (como un disponible en el futuro) que, mientras sea incompatible como una fuente, permite el control de funciones básicas por este producto.
Operación básica del sintonizador La función AF de este producto se puede activar y desactivar. Se debe desactivar la fun- ción AF para operaciones de sintonización normales. (Vea la página 26.) Sintonización de búsqueda y manual • Se puede seleccionar el método de sintonización cambiando el lapso de tiempo de presión del botón 2/3.
Operación básica Operación básica del reproductor de cassettes Nota: • Asegúrese de cerrar el panel delantero después de colocar o expulsar un cassette. Expulsión Presione el botón EJECT, y podrá abrir el panel delantero antes de la expulsión. En caso de abrir el panel delantero, podrá expulsar una cinta. Nota: •...
Avance rápido/rebobinado y búsqueda de canciones • Cada vez que se presiona el botón 3, el modo de avance rápido o de búsqueda de canciones hacia adelante cambia en el siguiente orden. Avance rápido = FF M-Search (Búsqueda de canciones hacia adelante) = Reproducción normal •...
Operación básica Operación básica del reproductor de Multi-CD Este producto puede controlar un reproductor de Multi-CD (en venta por separado). Cambio de la visualización Búsqueda de pista y avance rápido/retroceso A cada presión del botón • Se puede seleccionar entre la búsqueda de DISPLAY cambia la pista o el avance rápido/retroceso presio- visualización en el orden...
Page 87
Búsqueda de número de disco (para tipos de 6 discos, 12 discos) • Se puede seleccionar los discos directamente con los botones 1 a 6. Basta presionar el número correspondiente al disco que desea escuchar. Nota: • Cuando hay un reproductor de Multi-CD de 12 discos conectado y se desea seleccionar los dis- cos de 7 a 12, presione los botones 1 a 6 durante 2 segundos.
Operación básica Visualizaciones y botones correspondientes El visualizador de este producto presenta los indicadores de guía de botones. Estos indi- cadores se iluminan para indicar qué botones 5/∞/2/3 se pueden utilizar. Cuando se está en el menú de funciones (vea la siguiente sección), el menú de ajustes detallados (vea la página 22), menú...
2. Opere un modo (tal como la reproducción con repetición). El botón usado y la operación que realiza se indi- can por el indicador de guía de botones. Presione el botón 5 para activar el indicador de guía de botones, y el botón ∞ para desactivarlo. 3.
Page 90
Operación básica 7 Reproductor de cassettes Nombre de la función (Visualización) Botón: Operación Página 5: Activación Reproducción con repetición (Repeat) ∞: Desactivación 5: Activación Reproducción con exploración (Scan Play) ∞: Desactivación 5: Activación Salto de espacio en blanco (Blank Skip) ∞: Desactivación 2 o 3: Selección Intercepción de radio e intercepción...
Selección del menú de ajustes detallados En el menú de ajustes detallados, se pueden ejecutar funciones convenientes y complejas para cada fuente. 1. Seleccione el menú de ajustes detallados. Sostenga durante 2 segundos. 2. Seleccione el modo deseado. (Vea la siguiente sección, “Funciones del menú de ajustes detallados”.) Cada presión cambia el modo ...
Operación básica Funciones del menú de ajustes detallados En la siguiente tabla se muestran las funciones para cada fuente en el menú de ajustes detallados. En la tabla también se muestran las indicaciones para cada función, operaciones y botones usados para realizar las operaciones. Para más detalles, o cuando desea saber más sobre una operación, refiérase al número de página indicado en la tabla.
Operación del sintonizador Sintonización de búsqueda local (LOCAL) Cuando el modo local está activado (indicador “LOC” se enciende), se puede seleccionar solamente emisoras de señales fuertes. 1. Presione el botón FUNCTION y seleccione el modo local (LOCAL) en el menú de funciones. 2.
Uso de las funciones RDS ¿Qué es RDS? RDS (Radio Data System) es un sistema para transmisión de dados con los programas de FM. Esos datos, que son inaudibles, proveen una variedad de funciones tales como: nombre de servicio de programa, indicación de tipo de programa, espera por anuncio de tráfico, sintonización automática y sintonización por tipo de programa, para ayudar los oyentes de radio a sintonizar una emisora deseada.
Función AF (AlternativeFrequency) La función AF (Alternative Frequencies search) se usa para buscar otras frecuencias en la misma red de la emisora sintonizada actualmente. La función sintoniza de nuevo el recep- tor automáticamente a una otra frecuencia en la red con señales más fuertes, cuando hay problemas en la recepción de la emisora sintonizada actualmente, o si es posible obtener una mejor recepción en una frecuencia diferente.
Uso de las funciones RDS Función de búsqueda PI El sintonizador busca por una otra frecuencia transmitiendo el mismo programa. “PI Seek” (búsqueda PI) aparece en el visualizador y el volumen de la radio se enmudece durante la búsqueda PI. El enmudecimiento cesa después de completada la búsqueda PI, tenga la búsqueda PI sido exitosa o no.
Función de espera de anuncio de tráfico (Traffic Announcement) La función TA (espera por anuncio de tráfico) le permite recibir anuncios de tráfico automáticamente, independientemente de la fuente que esté escuchando. La función TA se puede activar para una emisora TP (una emisora que transmite información de tráfico) o una emisora EON TP (una emisora que transmite informaciones interreferenciales remisivas a las emisoras TP).
Uso de las funciones RDS Cancelación de anuncios de tráfico • Presione el botón TA mientras recibe un anuncio de tráfico para cancelar el anuncio y volver a la fuente original. El anuncio se cancela pero el sintonizador permanece en el modo TA hasta que se presione el botón TA nuevamente.
Función PTY Con la clasificación de ancho y estrecho del tipo de programa, la función PTY proporciona dos maneras para seleccionar las emisoras por el tipo de programa que se está emitiendo (PTY Search). La función también provee la sintonización automática a radiodifusiones de emergencia (PTY Alarm).
Uso de las funciones RDS Ajuste de interrupción de programa de noticias (News) La recepción automática de los programas de noticias con código PTY puede ser activada o desactivada. Cuando un programa de noticias recibido termina, la recepción del programa precedente continúa. •...
Alarma PTY La alarma PTY es un código PTY especial para anuncios relativos a emergencias tales como desastres naturales. Cuando el sintonizador recibe el código de alarma de radio, “ALARM” (alarma) aparece en el visualizador y el volumen se ajusta al volumen TA. Cuando la emisora deja de transmitir el anuncio de emergencia, la unidad vuelve a la fuente anterior.
Uso de las funciones RDS Lista de PTY Ancho Estrecho Detalles News&Inf News Noticias. Affairs Temas de actualidad. Info Información general y consejos. Sport Programas deportivos. Weather Informes del tiempo/Información meteorológica. Finance Informes del mercado de valores, comercio, operaciones de compraventa, etc. Popular Pop Mus Música popular.
Uso del reproductor de cassettes Reproducción con repetición (Repeat) El modo de repetición le permite escuchar la misma canción repetidamente. 1. Presione el botón FUNCTION y seleccione el modo de repetición (Repeat) en el menú de funciones. 2. Active o desactive la reproducción con repetición con los botones 5/∞.
Uso del reproductor de cassettes Intercepción de radio e intercepción de CD (Intercept) 7 Intercepción de radio (El indicador “RADIO I” se enciende.) Esta función le permite escuchar a la radio durante el avance rápido/rebobinado de una cinta. 7 Intercepción de CD (El indicador “CD I” se enciende.) Esta función funciona solamente cuando hay un reproductor de Multi-CD instalado en este producto.
Uso de reproductores de Multi-CD Reproducción con repetición (Play Mode) Existen tres gamas de reproducción con repetición: Repetición de una pista, repetición de disco y repetición de reproductor de Multi-CD. La gama de reproducción con repetición es la repetición de reproductor de Multi-CD. 1.
Uso de reproductores de Multi-CD Reproducción con exploración (Scan Play) En la repetición de disco, se explora el comienzo de cada pista en un disco seleccionado durante aproximadamente 10 segundos. En la repetición de reproductor de Multi-CD, se explora el comienzo de la primera pista de cada disco durante aproximadamente 10 segundos.
Pausa (Pause) Pausa permite detener temporalmente la reproducción de la pista actual. 1. Presione el botón FUNCTION y seleccione el modo de pausa (Pause) en el menú de funciones. 2. Active o desactive la pausa con los botones 5/∞. Compresión y DBE (Compression) El uso de las funciones Comp.
Uso de reproductores de Multi-CD ITS (Selección de canción instantánea) La función ITS le permite buscar la canción que desea reproducir cuando se hay instalado un reproductor de Multi-CD. Se puede utilizar la función ITS para programar hasta 24 can- ciones en cada disco de un total de 100 disco para una reproducción automática.
Borrado de una pista programada 1. Durante la reproducción ITS, seleccione la pista que desea borrar. 2. Seleccione el modo de programación ITS (ITS Memory) en el menú de ajustes detallados. (Vea la página 22.) 3. Borre la pista programada con el botón ∞.
Page 110
Uso de reproductores de Multi-CD 3. Cambie el tipo de caracteres deseado con el botón 1. A cada presión del botón 1 cambia el tipo de caracteres en el orden siguiente: Alfabeto (Mayúsculas), números y símbolos = Alfabeto (minúsculas) = Caracteres europeos, tal como aquéllos acentuados (ejemplo, á, à, ä, ç) Nota: •...
Page 111
Selección de discos mediante la lista de títulos de disco (Disc List) Se visualiza a cada 6 discos. Puede pasar visualizando la visualización. Para reproducir un disco para el cual ha ingresado el título en un reproductor Multi-CD y un disco CD TEXT en un reproductor Multi-CD compatible con CD TEXT, sigas los procedimientos siguientes.
Ajuste de audio Selección de la curva del ecualizador Se puede cambiar entre las curvas del ecualizador. • Desplace el selector EQ hacia arriba o abajo para seleccionar la curva del ecualizador deseada. “CUSTOM” POWERFUL + = NATURAL + = VOCAL + = CUSTOM + = FLAT + = SUPER BASS Nota: •...
Funciones del menú de audio El menú de audio presenta las funciones siguientes. Ajuste del equilibrio (FAD/BAL) Esta función le permite seleccionar un ajuste de potenciómetro/equilibrio que proporciona las condiciones de audición ideales para todos los presentes. 1. Presione el botón AUDIO y seleccione el modo de potenciómetro/equilibrio (FAD/BAL) en el menú...
Ajuste de audio Ajuste fino de la curva del ecualizador (Equaliz Se puede ajustar la frecuencia central y el factor Q (características de curva) de cada banda de curva seleccionada actualmente (LOW BAND/MID BAND/HIGH BAND). Los ajustes de la curva del ecualizador se almacenan en “CUSTOM”. Nivel (dB) Q=2W Q=2N...
Ajuste de sonoridad (Loudn La función de sonoridad compensa las deficiencias en las gamas de sonido altas y bajas en volúmenes bajos. Se puede seleccionar un nivel de sonoridad deseado. 1. Presione el botón AUDIO y seleccione el modo de sonoridad (Loudn ss) en el menú...
Ajuste de audio Fijación de los ajustes de altavoz de graves secundario (Sub W-2) Cuando la salida del altavoz de graves está activada (ON), puede ajustar la frecuencia de corte y el nivel de salida del altavoz de graves secundario. 1.
Ajuste del nivel de salida sin extinción (Non Fad Cuando la salida sin extinción está activada (ON), puede ajustar el nivel de salida sin extinción. 1. Presione el botón AUDIO y seleccione el modo de ajuste de salida sin extinción (Non Fad -2) en el menú...
Ajuste de audio Función de mejorador de imagen delantera (FIE) La función F.I.E. (Front Image Enhancer) provee un método simple de mejorar la imagen delantera mediante el corte de la salida de las frecuencias de gama media y alta desde los altavoces traseros, limitando sus salidas a las frecuencias de gama baja.
Función de ajuste de nivel de fuente (SLA) La función SLA (Ajuste de nivel de sonido) evita saltos radicales en el volumen cuando se cambia entre fuentes. Los ajustes se basan en el volumen de FM, que permanece sin cambiar. 1.
Extracción y colocación del panel delantero Protección contra robo El panel delantero de la unidad principal es extraíble como una medida antirrobo. Precaución: • Nunca fuerce ni tampoco agarre el visualizador con mucha fuerza al extraer o colocar el panel delantero.
Colocación del panel delantero 1. Asegúrese de cerrar la cubierta interna. 2. Vuelva a colocar el panel delantero encajándolo en su lugar. Sonido de advertencia Si no se extrae el panel delantero dentro de 5 segundos después de desactivar el encendido, se producirá...
Ajustes iniciales Selección del menú de ajustes iniciales Con este menú se pueden realizar los ajustes iniciales para el producto. 1. Desactive las fuentes. 2. Seleccione el menú de ajustes iniciales. Sostenga durante 2 segundos. 3. Seleccione el modo deseado. Cada presión cambia el modo ...
Funciones del menú de ajustes iniciales El menú de ajustes iniciales provee las siguientes funciones. Cambio del paso de sintonía de FM (FM tuning step) Normalmente ajustado en 50 kHz durante la sintonización por búsqueda en el modo FM, el intervalo de sintonía cambia a 100 kHz cuando se activa el modo AF o TA.
Ajustes iniciales Cambio de la búsqueda PI automática (Auto PI Seek) Durante la operación de búsqueda PI de emisora preajustada, puede activar o desactivar la función de búsqueda PI automática. (Vea “Función de búsqueda PI” en la página 27.) 1. Presione el botón FUNCTION y seleccione el modo de búsqueda PI automática (Auto PI Seek) en el menú...
Cambio de la salida del altavoz trasero (Rear Speaker Out) Los cables de los altavoces traseros del producto pueden usarse para una conexión de altavoz de gama completa (“Full Range output”) o altavoz secundario (“Sub woofer output”). Si cambia el ajuste de cable del altavoz trasero al ajuste “Sub woofer output”, puede conectar el cable del altavoz trasero directamente a un altavoz trasero sin usar un amplificador auxiliar.
Ajustes iniciales Ajuste del reductor de luz (Dimmer) Para evitar que el visualizador de este producto quede muy brillante durante la noche, cuando se encienden los faros del vehículo la luz del visualizador se atenúa. Esta función se puede activar o desactivar. 1.
Pioneer, así también como los contenidos del vehículo. Activación de la función de alerta RFP Pioneer ha desarrollado una visualización de menú que le permite ajustar su alerta RFP a sus necesidades personales. Pasando a través de este menú es posible seleccionar su propio “Tiempo de retardo de entrada”, “Volumen de salida de altavoz”...
Función de alerta RFP Activación y desactivación del altavoz interno Esta función le permite seleccionar si la salida del altavoz es generada o no cuando se dis- para “RFP Alert”. Inicialmente desde la fábrica la salida del altavoz se encuentra activada. Cambiando entre los botones 5, ∞...
Selección de los sistemas de puertas Es necesario seleccionar el “Tipo de sistema de puertas” (conmutando entre negativo o positivo) para el que tiene su vehículo. Inicialmente, el sistema se ajusta para los vehículos con el tipo de masa eléctrica (conmutación negativa). Seleccione a continuación el “Tipo de sistema de puertas”...
Al entrar a su vehículo, y dentro del ajuste “Tiempo de retardo de entrada” en el menú de alerta RFP, fije su panel delantero extraíble Pioneer como se describe en la página 52. Si ha olvidado su panel delantero extraíble, inserte la llave de encendido en el encendido,...
Detección de entrada Si la “Alerta RFP” no ha sido desarmada de acuerdo con “Desarme de la alerta”, la “Alerta RFP” será disparada. La “Alerta RFP” sonará durante 60 segundos y se repetirá 5 veces si cualquier puerta queda abierta o es vuelta abrir. Después de la quinta vez la “Alerta RFP”...
Otras funciones Cambio a la visualización de entretenimiento Puede cambiar la visualización a las pantallas de película, etc., mientras escucha cada fuente. (Por ejemplo, Modo de pantalla de película 1) • Seleccione la visualización de entretenimiento deseada. Cada presión cambia la visualización ... Cada presión del botón ENTERTAINMENT cambia la visualización en el orden siguiente: Indicador de nivel = Modo de pantalla de película 1 = Modo de pantalla de película 2 = Visualización antes de entrar en la visualización de entretenimiento...
Uso del botón PGM (Program Function) El botón PGM puede memorizar una de las funciones del menú de funciones. Es posible memorizar una función diferente para cada fuente. Ajuste del botón PGM 1. Seleccione el modo de ajuste del botón PGM (Program Function) en el menú de ajustes detallados.
Otras funciones Uso del botón PGM El botón PGM funciona de manera diferente dependiendo de la función programada (memorizada). • Utilice el botón PGM. 7 Sintonizador Nombre de la función (Visualización) Presione Sostenga durante 2 segundos Memoria de las mejores emisoras (BSM) Desactivación Activación Regional función (Regional) Activación/Desactivación...
Uso de la fuente AUX Es posible usar un equipo auxiliar (AUX) con este producto. Para escuchar al equipo auxiliar, active el modo AUX en el menú de ajustes iniciales, y seguidamente seleccione la fuente deseada. Selección de la fuente AUX •...
Reproductor de cassettes y cuidados Precaución Acerca del reproductor de cassettes • Una etiqueta floja u ondulada en un cassette puede causar problemas en el mecanismo de expulsión de la unidad o hacer que el cassette quede trabado dentro de la unidad. Evite utilizar tales cassettes, o saque tales etiquetas antes de utilizar el cassette.
Especificaciones General Reproductor de cassettes Fuente de alimentación ........14,4 V CC Cinta ....Cinta de cassette compacto (C-30 – C-90) (10,8 – 15,1 V permisible) Velocidad de la cinta ........4,8 cm/seg. Sistema de conexión a tierra ......Tipo negativo Tiempo de avance rápido/rebobinado Consumo de energía máximo ........