Table Of Contents - Honeywell RTH 7000 Installation Manual

Table of Contents

Table Of Contents3
Install In Three Simple Steps4
Installation Tips4
Pre-Installation Checklist5
Required Tools & Supplies6
Remove Your Old Thermostat7
Label Wires And Remove Old Wallplate8
Remove Wallplate9
Mark Wallplate Mounting Position10
Mount Wallplate11
Connect Wires (Typical Installation)12
Labels Don't Match?12
Alternate Wiring (Conventional Systems)13
Alternate Wiring (For Heat Pumps Only)14
Install Batteries15
About Your New Thermostat15
Remove Tab And Mount Thermostat16
Set Time/Date And Restore Electrical Power17
System Setup18
Year Setting (First Two Digits)19
Year Setting (Second Two Digits)19
Month Setting19
Date Setting19
Select System Type20
Heating Fan Control21
Heat Pump Changeover Valve (For Heat Pumps Only)21
Heating Cycle Rate22
Emergency Heat Cycle Rate (Heat Pumps Only)22
Manual/Auto Changeover23
Temperature Format (°F/°C)23
Daylight Savings Time On/Off24
Furnace Filter Change Reminder24
Smart Response Technology (On/Off)25
Clock Format25
In Case Of Difficulty26
System Settings26
Customer Assistance29
1-Year Limited Warranty30