Resetting The System Pin; Restoring The Base To The Factory Settings - Gigaset C610 Manual

Base settings

Resetting the system PIN

If you have forgotten your system PIN you
can reset the base to the original code 0000:
Disconnect the power cord from the base.
Hold down the registration/paging key on
the base while reconnecting the power
cable to the base. Press and hold the key for
at least five seconds.
The base has now been reset and the system
PIN 0000 set.
Please note
All handsets are deregistered and must
be re-registered. All settings are restored
to the factory settings.
•
Restoring the base to the
factory settings
When the settings are restored
u
date and time will be retained
u
handsets are still registered
u
Eco Mode is switched on and
Eco Mode+ is switched off
u
the system PIN is not reset
Ï
¢ ¢
v
System
~
Enter the system PIN and
§OK§
press
§Yes§
Press the display key.
64
¢
Base Reset
.