Table of Contents
Advertisement
4.7.4
Wireless MAC Filtering
Choose menu "Wireless → MAC Filtering", you can control the wireless access by configuring
the Wireless MAC Filtering function, shown in Figure 4-24.
To filter wireless users by MAC Address, click Enable. The default setting is Disabled.
MAC Address - The wireless station's MAC address that you want to filter.
Status - The status of this entry, either Enabled or Disabled.
Description - A simple description of the wireless station.
To Add a Wireless MAC Address filtering entry, click the Add New... button. The "Add or Modify
Wireless MAC Address Filtering entry" page will appear, shown in Figure 4-25:
Figure 4-40 Add or Modify Wireless MAC Address Filtering entry
To add or modify a MAC Address Filtering entry, follow these instructions:
1.
Enter the appropriate MAC Address into the MAC Address field. The format of the MAC
Address
is
XX-XX-XX-XX-XX-XX
00-0A-EB-B0-00-0B.
2.
Give a simple description for the wireless station in the Description field. For example:
Wireless station A.
3.
Select Enabled or Disabled for this entry on the Status drop-down list.
4.
Click the Save button to save this entry.
TL-WDR3500
Figure 4-39 Wireless MAC Filtering
(X
is
- 54 -
N600 Wireless Dual Band Router
any
hexadecimal
digit).
For
example:
Advertisement
Table of Contents
