Section 1. Adjustments; Overview; Static Control; Machine Identification - 3M MP8610 Service Manual

Hide thumbs Also See for MP8610:

Table of Contents

Multimedia Projector MP8610

1. Adjustments

1-1.

Make advanced adjustments to the MP8610 in a clean environment with minimal dust and positive pressure.

This section provides the advanced adjustment procedures needed to maintain a high quality projection image.

There is a specific order that adjustments are to be made and specific tools needed to complete each adjustment.

Important: Complete advanced adjustments to a projector only when the

machine settings fall outside of the allowable tolerances for that

adjustment, or when instructed to do so by another procedure.

1-2.

The circuit boards in the MP8610 are very sensitive to static energy. A simple static charge can ruin a circuit

board instantly. Because of this, it is essential that you complete all repairs in a static-safe work environment.

1-2-1. Static-Safe Work Environment

A properly grounded floor mat, table mat and adjustable wrist strap with grounding cord are needed for complete

static protection.

3M recommends any of the following workstation grounding kits:

3M™ Workstation Grounding Kit Model 8011

3M™ Workstation Grounding Kit Series 8020

3M™ Workstation Grounding Kit Series 8030

For your nearest distributor or to order, call 1-800-328-1368.

1-3.

To avoid incorrect adjustments, verify the model and version of the projector prior to making any adjustments.

Different versions have unique adjustment requirements. The serial number for MP8610 is located on the back

of the projector.

3M 1999

Important Note

Adjustments

1-1

Table of Contents

Troubleshooting