Mounting Wallplate To Wall - Honeywell ELECTRONIC THERMOSTATS T8401C Installation Instructions Manual

T8401C ELECTRONIC THERMOSTATS
T8401C1031 Yes
NO
This thermostat is a precision instrument and was
carefully adjusted at the factory. Handle it carefully.

Mounting Wallplate to Wall

IMPORTANT
Level only for appearance. The thermostat func-
tions normally even when not level.
Mount wallplate, T8401C, and the screws provided (see
Fig. 3) as follows:
1. Place the wallplate at the desired location on the
wall.
2. Pull the thermostat wire through the wallplate
entrance hole.
3. Select the two mounting holes that best fit the
application.
4. Fasten the wallplate to the wall using the anchors
and screws provided.
69-1483—1
Table 2. Zone Panel Cross Reference.
TotalZone MABS EZ
(TZ-3) (EZ-2, EZ-4)
Yes
NO
Fig. 2. Typical location of thermostat.
Mini Zone
(MM - 2, -3)
One Oher One
Yes No Yes
YES
NO
5 FEET
[1.5 METERS]
5. After wiring the wallplate, plug the hole to prevent
drafts from affecting the thermostat; see Wiring
section
.
WALL
MOUNTING
SCREWS (2)
1 WHEN USING WALL ANCHORS, DRILL 3/16 INCH
HOLES FOR DRYWALL, 7/32 INCH HOLES FOR
PLASTER OR WOOD.
Fig. 3. Mounting wallplate to wall.
2
Independent
MABS II, IIL
Oher
No No
M11338
WALL
ANCHORS (2)
1
WALLPLATE
M12202A
Zone