Control Panel Functions - Soleus Air PH1-14R-03 Owner's Manual

CONTROL PANEL FUNCTIONS

Starts or stops the unit.
Press to select the operating mode:
Fan Mode
Air Conditioning Mode
Heating Mode
Dehumidifying Mode
Auto Mode
Press to select the fan speed: High, Medium, and Low.
The fan speed can be visually distinguished by the number of the digital air segments (follow arrow
above) flow out from the windmill fan image on the multi-color display.
When in cooling or heating mode, the desired temperature can be selected by pressing the ∧ and ∨
buttons. The multi-color display flashes the temperature while it is being set. The multi-color display
shows the set temperature when it is not in temperature setting mode.
The multi-color display can show either Celsius or Fahrenheit. Press the ∧ and ∨ buttons
simultaneously to change the display from Celsius to Fahrenheit or vice versa.
To set the auto start time, press the Timer on button until the multi-color display shows a flashing
" ". Press the ∧ and ∨ buttons to change the clock to the desired time for the unit to
automatically start. To set the auto stop time, press the Timer Off button and the multi-color display
will show a flashing " ". Press the ∧ and ∨ buttons to change the clock to the desired time
for the unit to automatically stop. The light will flash for 3 seconds to activate the timer you
programmed.
In the diagram above, the letter "J" points to the adjustable time display. To adjust the time, Press FAN,
SPEED and SWING together (at the same time), then press UP to adjust the hours, and press DOWN
to adjust the minutes.
To start horizontal oscillation, press the Swing button once. ' ' icon will appear on the multi-color
display. To stop oscillation, press the Swing button again. Vertical air flow direction can be adjusted
manually.
11