Changing The Fuse; The Fcc Wants You To Know - RCA 5-Inch AC/DC Black and White Portable TV Owner's Manual

16-3001.fm Page 10 Friday, October 15, 1999 3:25 PM

CHANGING THE FUSE

If the TV does not work while using
vehicle battery power:
1. Make sure the TV is turned off,
then unscrew the knurled ring on
the DC power cord and remove
the spring to check the fuse.
2. If the fuse is bad, replace it with a
2-amp fuse (available at your local
RadioShack store). Do not use a
fuse with a different rating.
3. Replace the spring and the knurled
ring. Tighten the ring securely.
THE FCC WANTS YOU
TO KNOW
This TV complies with the limits for a
Class B digital device as specified in
Part 15 of FCC Rules. These limits
provide reasonable protection against
radio and TV interference in a
residential area. However, your TV
might cause TV or radio interference
even when it is operating properly. To
eliminate interference, you can try one
or more of the following corrective
measures:
• Reorient or relocate the receiving
antenna.
10
• Increase the distance between this
product and the other radio or TV.
• Use outlets on different electrical
circuits for this product and the
other radio or TV.
Consult your local RadioShack store if
the problem still exists.