SR10000
d. Make sure that your Home Network's wireless SSID is broadcasting and not hidden. If your Home
Network SSID is hidden, you will need to manually setup the Smart Repeater through the Wireless
Settings > Home Network Settings menu.
My Smart Repeater was working fine previously but now I can no longer access the Internet through the
Smart Repeater. Or, I had a
a.
The connection to your Home Network has been dropped. This can be caused by several events to
your home wireless connection. When this occurs you may rescan for another network by accessing
http://setup.ampedwireless.com
Home Network and your home wireless router.
b. Check to see that your home wireless router settings have not changed. Any changes to the SSID,
security, or channel number from the original settings will disconnect the Smart Repeater's
connection to the home network. A power outage can cause a change in the channel of your router.
To solve this simply run the Smart Setup Wizard again from the web menu and reconfigure your
Home Network connection. You can also set a static channel number on your router to prevent this
from happening again in the future.
c.
If you cannot access the setup menu, check to see that your Smart Repeater is still on. Reboot the
Smart Repeater by unplugging the power adapter and plugging it back in. Check to see if your
USER'S GUIDE
POWER OUTAGE
and now the Smart Repeater no longer works.
to connect to and repeat or you may try to fix the issues with your
43