Amped Wireless SR10000 User Manual page 16

SR10000
If the Home/Office Network connection fails try the following...
a. Check to see that your Home Network security settings are correct.
b. Check on the SCAN page that your Home Network is showing a signal of 70% or greater. If not, move
the Smart Repeater closer to your Home Network router and try again.
c. Check that your Home Network router's DHCP server is enabled.
d. Try changing the channel of the Home Network router to a higher channel number (5-11) and run the
Setup Wizard again.
e. If possible, check the Internet connection for your Home Network wireless router. Connect directly to
your Home Network wireless router. If you are unable to access the internet through the Home
Network wireless router, you must first fix this problem. The Smart Repeater will not be able to
obtain internet access through a router that does not have internet access. Once Internet access is
restored, connect to the Smart Repeater again and retry the Smart Setup Wizard.
f. Return to the Smart Setup Wizard and attempt to connect to another Home Network known to have
Internet access.
g. Try to reboot (unplug the power from the Smart Repeater and plug it back in) the Smart Repeater and
check to see if the connection is established (some networks may be very slow and take longer than
the allotted time for the Smart Repeater to successfully connect).
USER'S GUIDE
15