Honeywell B/Q682 Owner's Manual page 12

To change the pins or add a new energy
savings period—
• To insert a pin, push it straight into the
selected notch on the program dial until it's
completely seated.
• To remove a pin, press against program dial
and pull the pin straight out. Do
to change a pin if it is engaged with the
program index wheel.
• On heating-cooling systems, you must
remove the program pins from the heating
program to set new times for your cooling
program. Write down your colors and time
for reprogramming at the next heating
season. Also, you may want to change the
temperature setting lever positions.
Setting the Heating Program
Decide when you want the temperature to
reach the comfort level. Find the notch on the
program dial that's one-half hour before this
time and insert a r
start gives the furnace time to heat the house
before you wake up or arrive home.
not
attempt
NIGHT
ENERGY
SAVING
PERIOD
DAY
ENERGY
SAVING
PERIOD
1
12
ed
pin. The half-hour head
WINTER
PROGRAM
TEMPERATURE
PIN IN
°C CONTROL
°F
14
58 BLUE
BEGINS
10:00 PM
ENDS 20
68 RED
6:00 AM
BEGINS
14
58 BLUE
7:30 AM
ENDS
20
68 RED
4:00 PM
NOT APPLICABLE ON HEATING-ONLY MODEL.
Fig. 5—Program examples.
SUMMER 1
PROGRAM
TEMPERATURE
PIN IN
°C CONTROL
°F
80 27
RED
75 24
BLUE
27
80 RED
24
75 BLUE
M8677
69-0563—2