LG GCC-4242N Service Manual page 42

EEPROM DATA save
1. iol @eep_save [Enter]
file name? abcdef [Enter]
2. monjc3 [Enter]
[F10]EPROM
P
file name? abcdef [Enter]
EEPROM DATA load
1. iol @eep_load [Enter]
file name? abcdef [Enter]
Audio heatrun (monjc3)
monjc3 [Enter]
[F12]Specl
[F1]ATAPI
AHEAT [Enter]
[F2]ERcnt
Tilt move (monjc3)
Monjc3 [Enter]
[F12]Specl
[F10]D.add
key board arrow button : up/down
DATA sRAM Address 0602 D Length 01 N of DATA 01 Bank 00 [Enter]
DATA Name sRAM_0602 [Enter]
DISP Loc. Keyboard arrow button : up/down/left/right [Enter]
OK Enter No ESC [Enter]
Audio heatrun (refer to above)
set to Address 0602
0005 : radial tilt center
7FF5 : radial tilt inner most (001 to 7FF)
8005 : radial tilt outer most (FFF to 800)
* : Address 0602 is write only register (can not read)
Initial disc distinction (monjc3)
monjc3 [Enter]
[F12]Specl
[F10]D.add
key board arrow button : up/down
DATA mRAM Address 00000032 D Length 02 N of DATA 01 Bank 00 [Enter]
DATA Name mRAM_0032 [Enter]
DISP Loc. keyboard arrow button : up/down/left/right [Enter]
OK Enter No ESC [Enter]
0001 : CD-ROM/0003:CD-R/0005:CD-RW
0030 : DVD-SL,+R,-R/0210 : DVD-DL/0C00 : DVD-RAM, +RW, -RW
Intial time becomes long if initial disc distinction is mistaken.
44