Setup
HDMI AUDIO
The audio signals transmitted over the HDMI Cable
can be toggled On/Off.
~
Off : Video is transmitted over the HDMI
connection cable only, and audio is output
through the product speakers only.
On : Both video and audio signals are transmitted
~
over the HDMI connection cable, and audio
is output through your TV speakers only.
✎
NOTE
`
The default setting of this function is HDMI Audio
Off.
`
HDMI Audio is automatically down-mixed to 2ch
for TV speakers.
`
When HDMI Audio is set to On, PL II /DSP EQ
/P.BASS doesn't work.
`
With HDMI AUDIO set to 'On', the volume can be
adjusted only using the TV remote control.
User EQ
You can confi gure the equalizer settings manually to
your preference.
Settings
User EQ
dB
6
·
·
·
·
·
·
·
·
·
·
·
·
-6
250Hz
600Hz
1kHz
3kHz
a Reset > Adjust < Move ' Return
mMove " Select ' Return
✎
NOTE
`
This can be also done using the DSP/EQ button.
(see page 38)
Audio Return Ch.
You can enjoy TV sound from the Home Cinema
speakers by using just one HDMI cable.
~
Off : Turn the Audio Return Channel function off.
0
English
Auto : Listen to TV sound from the Home Cinema
~
speakers if your TV is compatible with the Audio
Return Channel function.
✎
`
`
`
Initial Settings
By using the Initial Setting, you can set the language,
TV aspect and ASC(Auto Sound Calibration) setting.
Check if the ASC microphone is connected to the
product.
✎
`
DivX(R) Registration
View DivX(R) VOD Registration Code to purchase
and play DivX(R) VOD content.
6kHz
10kHz 15kHz
✎
`
`
DivX(R) Deactivation
Select this to get a new registration code.
NOTE
When Anynet+ (HDMI-CEC) is Off, the Audio
Return Channel function is not available.
Using an ARC (Audio Return Channel)-
uncertifi ed HDMI cable may cause a problem in
compatibility.
ARC function is only available if an ARC-
compliant TV is connected.
System
NOTE
If an HDMI cable is connected to the product,
the TV aspect does not appear and it is set to
16:9 Wide automatically.
NOTE
This option is not activated if you select OK.To
activate this option, please activate the DivX(R)
Deactivation.
Even after you reset the system, the settings of
DivX Registration will not be reset.