Cleaning The Mesh Filter - Philips HomeRun FC9910 User Manual

Tip:
E
You can also rinse the dust container under
the tap after you have removed the filters.
Make sure the dust container is dry before
you reinsert it into the robot.
Note:
D
The dust container is not dishwasher-proof.
Close the shutter (1) and press the latch to
6
lock the shutter (2).
Put the dust container back into the robot
7
(1). Fold down the handle to lock the dust
container in place (2).
Make sure the hooks lock the dust container
8
properly.
22
1
1
CLICK
Note:
D
if the hooks do not lock the dust container
properly, press the dust container and the
handle down again to make the hooks slide
towards the dust container all the way.
insert the two lugs on the dust container
9
compartment cover into the robot (1) and
lower the dust container compartment
cover to close it (2).
2
7.2 Cleaning the mesh filter
For the best results, we advise you to clean
the mesh filter every time you empty the dust
container.
Follow steps 1 to 3 in section 'Emptying the
2
1
dust container' to remove the dust container
compartment cover, take out the dust
container and remove the cleaning tool from
the inside of the dust container compartment
cover.
Pull at the release tab to detach the filter
2
holder from the dust container (1). Take the
mesh filter out of the filter holder (2).
1
1
2
2