Timer - Philips HomeRun FC9910 User Manual

6.3 Timer

6.3.1 Setting the timer
With the timer function, you can let your
homeRun clean at a set time every day.
Press the TIMER button on the remote
1
control (1). The timer indication and the hour
indication start to flash (2).
1
Use the + and - buttons to set the hour at
2
which you want the robot to start cleaning
(1). The set hour appears on the display (2).
1
Press the ENTER button to confirm (1).
3
The set hour lights up continuously on the
display (2).
1
Use the + and - buttons to set the minutes
4
(1). The set minutes appear on the display (2).
2
Press the ENTER button to confirm (1). The
5
timer indication lights up continuously on the
display. The clock time appears on the display
(2). Your HomeRun starts cleaning in AUTO
cleaning mode at the set time.
2
When the HomeRun has finished cleaning, it
6
returns automatically to the base station to
charge if its starting point was the base station.
if it started at another place in the room, it
automatically returns to that place.
Note:
D
You can only use the timer if the clock time has
been set.
2
Note:
D
The timer function only works when the
HomeRun is in standby mode, i.e. when the on/off
switch on the bottom is in ON position. it does
not work when the robot is charging directly from
the mains.
1
1
2
2
19