Boss Audio Systems 810DBI User Manual page 12

OPERATION
The operation is the same with the MP3
operation described above. If in other
mode, you can also press MOD button (19)
to select memory card play mode.
CAUTION
When there are important files in the USB
device or memory card, do not connect it to
the main unit to play. Because any wrong
operation may cause files loss. And our
company assumes no responsibility for
this.
BLUETOOTH OPERATION
PREPARING FOR OPERATION
(1) When use Bluetooth, please make sure
the mobile phone supports Bluetooth
function.
(2) For the different kind of mobile phone,
Bluetooth emissive power has some
difference. To get the best conversation
quality, it is commended that the
distance between the mobile phone and
the unit is within 3m. And please don't
put any metal object or any obstacle
between the path of the mobile phone
and the unit.
PAIRING
1) Long pressing MOD/PAIR button (19)
until LCD display "BTPAIR" to enter
paring mode. On the mobile phone,
select the Bluetooth set up. (Please
refer to the instruction manual of your
mobile phone on how to operate
Bluetooth.)
2) "BOSS AUDIO" should appear in the
list on your mobile phone, please
select "BOSS AUDIO" and then input
password "0000".
3) The unit has auto pairing function, it will
searching the Bluetooth mobile phone
automatically.
4) When successful paired, "CON OK"
will be displayed on LCD for several
seconds.
5) If pairing failed, try to pair again within
several seconds. You can refer to the
operation about your mobile phone,
delete the device that just searching for
and repair again.
6) During pairing, if you want to exit it, long
pressing MOD/PAIR button (19) unit
LCD appears "PA END".
ANSWERING/REJECTING AN
INCOMING CALL
When a call coming. You can press
button (1) to answer the call, or press
button (18) to reject the incoming call.
MAKING AN OUTGOING CALL
Making an outgoing call by inputting the
phone number manually.
Press button on the remote control first,
then use 0~9, *, # buttons on the remote
control to enter the phone number you
want to dial. Then press
will call the number.
TEN LAST NUMBER
DIALED/ MISSED) ACCESS FUNCTION
If a phone is paired and connected, short
press SEL button (5) to select VOL /BAS
/TRB /BAL/ FAD/ RECEIVED/ DIALED/
MISSED in order.
When selecting RECEIVED (or DIALED, or
MISSED), you can rotate the volume knob
to access the last 10 numbers (When there
is no number, it will show "EMPTY"). And
you can shortly press
remote control to confirm the dialing when
select one number.
TRANSFER THE
MOBILE PHONE AND THE UNIT
During the talking mode, you can press
button (1) for several seconds to transfer
the phone call between the mobile phone
and the unit.
Note:
If you transfer the call to mobile phone, the
mute of the present mode will be released
at the same time.
button again
(RECEIVED/
button on the
CALL BETWEEN