Clearing Scan Data - Honeywell Dolphin Demos User Manual

Field This field displays ...
Symbol The symbology type.
Length The length of the bar code.
Count The number of scans completed since View Statistics was turned on. If you complete
one scan, this field displays a count of 1 and increased by one with each additional scan
performed.
When you disable scan statistics, the Count is reset to zero; see
5-1.
Note: The following three fields display the cumulative scan statistics from the time that View Statistics was
enabled. To reset any of these values to zero, disable the scan statistics.
Time The number of milliseconds (ms) to decode the bar code.
Avg Time The average decode time of all bar codes decoded.
Min Time The shortest decode time of all bar codes decoded.
Max Time The longest decode time of all bar codes decoded.

Clearing Scan Data

Tap File > Clear to erase the current scan data.
5 - 2 Rev A
8/6/08
Scan Statistics on page
Dolphin® Demos User's Guide