Samsung VP-D101 Service Manual page 9

2-2-2 Camera Adjustment
Note : "XX XX" indicate the previous preset value and adjusted value.
Press the "ENTER button" (Confirm) to store the adjusted value.
1) EEPROM Data Initialize
Caution : This adjustment must do following items changing new EEPROM (IC705) or Main PCB.
ΠPress the "EASY-Q"(Mode Up)/"DISPLAY"(Mode Down) buttons so that OSD shows "00DF XX XX".
´ Using "MENU Dial"(Data Up/Down) so that display data of EVR is "A0"
ˇ Press the "ENTER button" (Confirm).
¨ The OSD shows "OK" after huithing the initalize.
2) Lens Zoom Track
Caution : For whole zoom range, it shall be in focus.
The location of a focus lens is moving depending on the location of Zoom Lens.
During adjusting, micom measures the focus location from a near distance to a long.
ΠCamera is set to E-E mode.
´ Focus chart photo.
ˇ Ensure that camera is left an about 3m distance from a focus chart and the focus of lens is placed vertically.
Attach a focus chart to white or gray wall of a flat surface.
¨ Connect a video output terminal to a TV.
ˆ Press the "EASY-Q"(Mode Up)/"DISPLAY"(Mode Down) buttons so that OSD shows "00DE XX XX".
Ø Press the "ENTER button" (Confirm).
Never impact on the lens when adjusting zoom and focus Lens.
The OSD shows "OK" after finishing the adjustment.
Samsung Electronics
CAMADJ EPR EVR
00DF XX XX
(Be sure to maintain the distance)
Fig. 2-6
3M ± 1cm
LENS
Fig. 2-7
Alignment and Adjustments
Adjusted values
Stored values
CCD
2-5