Samsung VP-D101 Service Manual page 12

Chassis : delta ii digital video camcorder
Hide thumbs Also See for VP-D101:
Table of Contents

Advertisement

Alignment and Adjustments
3) How to get into the LCD adjust mode
[STEP 1]
ΠConnect the Power source.
´ Set the Power Switch to "CAM" position and Mode Switch to "TAPE" position.
[STEP 2]
ΠPress and hold the "STOP" and "PB ZOOM" buttons on the video camera at the same time for more than
5 seconds.
´ When "ADJ ITEM" OSD appears at the monitor as shown Fig. 2-9, move to a " CAM ADJ" through
"Menu Dial" scrolling and press the "ENTER button".
Fig. 2-10 will be shown in LCD screen and move to Address No. "012C" to adjust its value as "01".
In order to save the modification value, press the "ENTER button" again.
(this is for setting up of Color Bar output.)
◆ After completing all of adjustment, the Value of Address No. "012C" must necessarily return as "00".
ˇ Move a Power Switch to OFF. (Don't have to plug it out)
EASY-Q Button
ADJ ITEM
VCR ADJ
CAM ADJ
CODEC ADJ
PRML ADJ
CAM DISP
DSC ADJ
LCD/CVF ADJ
2-8
STOP Button
Mode Switch
DISPLAY Button
PB ZOOM Button
Fig. 2-9
MENU Button
MENU Dial
ENTER Button
Fig. 2-8
CAMADJ
EPR EVR
012C
XX
Power Switch
01
Adjusted values [01]
Address values [012C]
Fig. 2-10
Samsung Electronics

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vp-d101iVp-d103Vp-d105iVp-d103iVp-d105Sc-d103

Table of Contents