JVC KD-AR390J Service Manual page 8

3.1.4 Removing the MAIN BOARD assembly (See Fig.5,6)
(1) Remove the two screws F and one screw G attaching the
MAIN BOARD assembly. (See Fig.5)
(2) Remove the two screws H attaching the MAIN BOARD assembly.
(See Fig.6)
(3) Disconnect the connector
BOARD assembly and CD MECHANISM assembly. (See
Fig.6)
3.1.5 Removing the CD MECHANISM assembly (See Fig.7)
(1) Remove the three screws J attaching the CD MECHANISM
assembly.
1-8 (No.MA376<Rev.002>)
CN501 connected to MAIN
F
G
Fig.5
CN501
H
Fig.6
J
J
Fig.7