JVC KD-AR390J Service Manual page 10

3.2.2 Removing the top cover (See Fig.3 to 5)
• Remove the MECHANISM CONTROL BOARD assembly.
(1) From the front side of the CD MECHANISM assembly,
change the hook position of the two roller springs. (See
Fig.3.)
(2) From the side of the CD MECHANISM assembly, remove
the six screws C attaching the top cover. (See Fig.3 and 4.)
(3) Take out the top cover in an upward direction. (See Fig.5.)
Top cover
Roller spring Roller spring
Top cover
C
1-10 (No.MA376<Rev.002>)
C
Fig.3
C
Fig.4
Top cover
Fig.5