Registering With Avamar For Backup And Restore - Iomega StorCenter px2-300d User Manual

Iomega StorCenter px2-300d User Guide

Registering with Avamar for Backup and Restore

Avamar is backup and recovery server software that uses deduplication to eliminate redundant
copies of data, reducing the required storage space. For example, your Iomega StorCenter px2-300d
might have 100 email messages with the same 1 MB attachment. If all those emails are backed up,
that same attachment is backed up 100 times, requiring 100 MB of storage space. With Avamar and
data deduplication, only one copy of the attachment is actually stored, so 100 MB of storage is
effectively reduced to 1 MB.
Note: When you enable Avamar on your px2-300d, you are registering with an Avamar server. You
cannot back up and restore from your px2-300d. Backup and restore operations are executed from
the Avamar server.
Registering Your px2-300d with the Avamar Server
1. On the Avamar page, click the switch on.
The Avamar Settings pop-up window opens.
2. In the Avamar Settings pop-up window, enter the following information and click Apply to save
your settings:

Server Address — the Avamar server IP address or hostname.

Client Domain — the registered domain name from the Avamar server.
78