Setting Up Your Tv Channels - Hauppauge WinTV-HVR-Series Reference Manual

WinTV Reference Manual
Search for Analogue channels
This section refers to products with RF antenna and Cable tuner.
Click on the Button MENU and "Suite-Manager" to open the channel manager. Select the
<sources> and highlight the <analog> source.
Automatic channel search
Click on "Autoscan...", in order to start the automatic RF antenna channel scan. The channel
frequencies will scan from 1 to 69. When channels are found they will be listed and the scan-
ning will continue. After the completion of the channel scan a new window of an overview of
the scanned frequencies and the number of found programs are will be displayed.
Manual channel search
You can shorten the channel scan if you know the channel numbers for your local transmitter
by entering the numbers into the channel number and click on Tune. Please refer to the trou-
bleshooting section to find out the channel for your location.
Search for DVB-T channels
N ote: This section refers to products with DVB-T tuner (WinTV-NOVA-T and WinTV-
HVR series). Select the DVB-T option on the left hand side.
Automatic channel search
Click the <Autoscan> button to start the search for DVB-T channels, ensure that you have
selected your country location. The channel search will count from 1 to 74 and when a signal
is found the box locked will have a tick.
Manual channel search
You can shorten the channel scan if you know the Multiplex Channel Numbers for your local
digital transmitter by entering the numbers into the Channel Number and click on Tune.
Please refer to the troubleshooting section to find out the Multiplex Channel Numbers for
your location.
6