Error Message: Open Failure; Problem: The Entry Virtual Dvb-S/-C/-T Network Adapter In The Device; Manger Has A Yellow Mark Next To It; Problem: When Scanning For Channels No Channels Are Found - Hauppauge WinTV-DVB Installation And Reference Manual

WinTV-DVB / NEXUS Installation and Reference Manual
click on the "Refresh" button Windows then detects a Plug & Play WinTV-
DVB / NEXUS card. Now if you insert the WinTV-DVB / NEXUS CD, the
WinTV-DVB / NEXUS drivers will be installed. After the installation of the dri-
ver, the entry in the Networking section in Device Manager " Virtual DVB
adapter " must be present and under the "sound video and game controllers
the WinTV-DVB / NEXUS should be listed.
Error message: Open Device failure message
This error message will appear when starting the Digital TV application if the
driver has not been installed correctly. Please check that the driver has been
installed correctly in the device manager and remove and re-install if needed.
Note: you can use the program DVBclear.exe on the installation CD to remo-
ve the driver and Inf files after using the add/remove programs in the control
panel to remove the application.
Problem: The entry Virtual DVB-s/-c/-t Network
Adapter in the device manager has a yellow mark
next to it
The WinTV-DVB / NEXUS card's driver was not mapped correctly to the
hardware and should be resolved by removing the Virtual DVB-s/-c/-t in the
device manager and re-starting the computer to install it again.
Problem: No channels are found
1. Please check that the satellite antenna is connected correctly to the card.
2. Check that the Virtual DVB-s/-c/-t Network Adapters. is not bound to
Client for Microsoft Networks in the TCP/IP Protocol in the adapter pro-
perties.
3. If you have any third-party Firewall software like Zonealarm installed then it
may beblocking the channel from being scanned. Add the card to the allo-
wed devices in the security settings of the application.
4. Consider the DiSEqC settings if the WinTV-NEXUS-s card is used with a
Multiswitch system. Check the "LNB/Satellite" settings under the "DiSEqC
configuration". Try selecting the different options of "DiSEqC Level 1.0"
and click on OK for the change to take effect.
5. Please ensure that your Satellite LNB is a Digital "Universal LNB". If you
are using a Multi-switch (for several users) then this must also be a
54