Connections; Connecting To An Antenna; Setup (Initial Setup) - Samsung TC300 User Manual

Connections

When the LED display is initially powered on, basic settings proceed automatically.
✎
Preset: Connecting the mains and antenna.
Power Input
When the LED display is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Setup is available only when the Input Source is set to TV.
✎
Before turning on the LED display, make sure the antenna cable is connected.
1
Selecting a menu
language
2
Selecting Store Demo
or Home Use
3
Selecting an area
4
Auto Tuning
5
Setting the Clock Mode Set the Clock Mode automatically or manually.
6
Complete
If You Want to Reset This Feature...
Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is "0-0-0-0". If you want to change the
PIN number, use the Change PIN function.
You should do Setup (MENU
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN
to "0-0-0-0": POWER

Connecting to an Antenna

Setup (Initial Setup)

Press the u or d button to select a menu language. Press ENTERE button
twice when done.
Press the u or d button, then press the ENTERE button.
Select the Home Use mode. Store Demo Mode is for retail environments.
x
x To return the unit's settings from Store Demo to Home Use (standard):
Press the volume button on the LED display. When you see the volume
OSD, press and hold
Store Demo is only for shop display. If you select it, several functions are
x
not able to use. Please select Home Use when you watch at home.
Press the ENTERE button. Select the appropriate area by pressing the u or d button.
Press the ENTERE button to confirm your choice.
Press the u or d button to select correct option, and then press ENTERE button twice. Let's
find and store channels on your TV. Do you need to search for channels?
Yes, I need to. All the channels available will be found and stored on your TV. (Auto Tuning
x
necessary)
x No, I don't need to. My set-top box provides all the channels that are available, so I don't
need to search for channels.
✎
You can complete Setup by selecting it.
Air / Cable: Select the antenna source to memorise.
x
Digital & Analogue / Digital / Analogue: Select the channel source to memorise.
✎
You can check more details on page22.
Auto: Select the time zone (depending on the country) where you are located.
x
Manual: Allows you to manually set the current date and time.
x
✎
If the customer chooses "No, I don't need to." in step 4, the clock just
can be set manually.
Press the ENTERE button.
→ System) again at home although you did in shop.
(off) → → 8 → 2 → 4 →
MUTE
MENU for 5 sec.
POWER (on).
ANT OUT
P
14
English