Table of Contents
Advertisement
b. Large Capacity Tray
Value:
[Appropriate Paper Size]
Example:
Letter (81/2x11)
Default:
Depends on paper tray configuration.
Description: It indicates paper size configuration of Large Capacity
Tray. It depends on hardware configuration, not
software condition. When tray is opened, nothing is
printed at here.
This line is not printed when Large Capacity Tray is not
attached.
c. Bypass-Tray
Value:
[Appropriate Paper Size]
Example:
Letter (81/2x11)
Default:
Depends on the paper size set on Bypass Tray.
Description: It indicates paper size of set on Bypass Tray. It depends
on detection of Bypass Tray paper size. (Unknown)
means paper size cannot be detected.
B. Software Information
PostScript Emulation
a. Job Time-out
Value:
# (variable length digit)
Example:
0
Default:
0
Description: This value indicates PostScript Job Time-out length
(seconds). If this time will pass from receiving the job
then PostScript interpreter will give up to print the job
and cancel.
b. Manual Feed Time-out
Value:
# (variable length digit)
Example:
0
Default:
0
Description: This value indicates PostScript Manual Feed Time-out
length (seconds). If the print data break off during print-
ing and this time will pass, then PostScript interpreter
will cancel the print job. 0 means never time out.
c. Wait Time-out
Value:
# (variable length digit)
Example:
300
Default:
300
Description: This value indicates PostScript Wait Time-out length
(seconds). If the print data break off during printing and
this time will pass, then PostScript interpreter will cancel
the print job. 0 means never time out.
PCL5e Emulation
This section tells PCL5e information. This section would not appear
on AR-PB1 (Siam) for Japan domestic.
a. Font Source
Value:
(Resident | Download)
Example:
Resident
Default:
Resident
Description: Current font source to print characters in PCL mode.
b. Font Number
Value:
0 to 45
Example:
0
Default:
0
Description: This is the current default font number used for plain
PCL job stream.
c. Font
Value:
(PCL font name)
Example:
Courier
Default:
Courier
Description: Current default font for PCL printing.
d. Pitch Size
Value:
# (variable length digit)
Example:
0.44 to 99.99 in 0.01 steps
Default:
10.00
Description: This is the current default pitch size for plain PCL job
stream.
e. Point Size
Value:
# (variable length digit)
Example:
4.00 to 999.75 in 0.25 steps
Default:
12.00
Description: This is the current default point size for plain PCL job
stream.
f. Symbol Set
Value:
(PCL symbol set name)
Example:
Roman-8
Default:
Roman-8
Description: This is the current default symbol set for plain PCL job
stream.
Network Information
a. NIC Serial Number
Value:
######
Example:
123456
Default:
Depends on NIC.
Description: It indicates the NIC's serial number. This value is written
in NIC's ROM (or flush ROM).
b. NIC Firmware Version
Value:
######
Example:
123456
Default:
Depends on NIC.
Description: It indicates the NIC's serial number. This value is written
in NIC's ROM (or flush ROM).
c. NetWare Print Server Name
Value:
[User Definable]
Example:
SHARP_990792
Default:
SHARP_[NIC card serial number]
Description: This value must reflect the printer name for IPX/SPX
(NetWare).
5 – 3
AR-PB2A
Advertisement
Table of Contents
