NetComm NF3ADV Quick Start Manual page 4

8. Step 6 of the wizard prompts you to
configure the username and password
used to log in to the gateway. We
highly recommend changing the default
username and password of the gateway
for security reasons. In the Desired
Username field, enter the username
you would like to use. In the Desired
Password and Retype Password fields,
enter the password that you would like to
use. Click the Next button to continue.
Note: Remember to write down the username and password
that you configure.
9. The wizard displays a summary of the
settings that you configured. Click the
Finish button to complete the wizard.
NetCommWireless
CONNECTING VIA WIFI
You can connect multiple computers,
laptops, tablets and smartphones to your
gateway's wireless networks by performing
the following steps. Note that the gateway
has both a 2.4GHz and a 5GHz wireless
network. The network that you connect to
is configured on your wireless device and is
subject to the device's compatibility.
1. Using your wireless device, perform a
scan for wireless networks and select
the wireless network name listed on
the included Wireless Security Card.
If you changed the SSID Broadcast
Name using the Setup Wizard, select the
wireless network displaying the name
that you entered.
2.
Enter the wireless security key listed
on the included Wireless Security Card
and click Connect. If you changed the
wireless security password using the
Setup Wizard, enter the new password
you configured with the Wizard.
3. Wait approximately 30 seconds for the
connection to establish.
Your NetComm Wireless Dual Band
WiFi Data and VoIP Gateway is now
ready to use.