Table of Contents
Advertisement
Remote Control of OSD from PC
Remote Control Connections
Remote Control Operation
Rev 1.00
The HCC484TP can be controlled remotely using an RS485 cable to connect through the
serial port on your PC. See the figure below for a description of the RS485 connection.
RS485
Connect to
Serial
converter
Serial Port
cable
(COM1 or
COM2)
4-Pin Cable Legend
1. Red
Not used
2. Blue
TRx-
3. Yellow
TRx+
4. Black
Not used
RS485 Converter
4P Cable
3
TRx+
2
TRx-
To use the optional remote control for your HCC484TP camera, you must first download the
program from the Honeywell website and connect the camera to your PC. Use the following
procedure to connect to your PC:
1.
Connect the RS485 converter (such as the Honeywell Converter: AAC 232/485) to the
4P cable from the camera to the COM port on your PC (see the figure above).
Locate the downloaded zip file: HCC484TP_Remote_Control.zip.
2.
HCC484TP Color Camera Remote Control User Guide
4P Cable
-
TRx+
TRx-
1
VIDEO
UP
CONT
MENU
+
CV
DOWN
VSD
DC
D002529
04/06
Advertisement
Table of Contents
