Occuswitch Dali Modes - Philips OccuSwitch DALI LRM2070 Datasheet

LRM2070, LRM2080, LRM2090 Datasheet
OccuSwitch DALI sensor/controller

OccuSwitch DALI Modes

The OccuSwitch DALI is set, by default, with a generic set of
parameters for a standard office. But it is possible to recall 8 other
application (specific cell, open plan or meeting room) modes as
mentioned below.
This makes the system very flexible for all different kinds of applications.
With the aid of the extended IR programming tool IRT9090 specific
modes can be selected. Once selected, the mode can be stored and
copied via a point and shoot method. The mode will be stored in a non-
volatile memory. Even when the luminaires are switched off for a longer
period, stored parameters are kept.
The modes are compatible with the Actilume system's modes, except
for modes 4 and 5.
Mode 1
Cell o ce
Auto on
Mode 2
Open plan o ce
Auto on
Mode 3
School, classroom
Manual on
Mode 4
Cell o ce
Comfort mode
EN 12464
Mode 5
Open plan o ce
Comfort mode
EN 12464
**
This mode works differently for the advanced (LRM2080) and network (LRM2090) OSD when compared with OSD basic (LRM2070). For LRM2080 & LRM2090 the
lights will switch off (the basic never switches off) when none of the advanced OccuSwitch DALI units in the parallel network detect movement. If one or more do detect
movement, all other units will go to background level.
T1 T2
Mode 6
Corridor
Auto on
Mode 7
Toilets
Auto on
DDR o
Mode 8
Meeting rooms
Mode 9
Open plan
Always light
Auto on
Mode 10
Open plan
Comfort mode, always light
11/15
T1 T2
T1 T2
Custom mode