Mac Filtering - NETGEAR N450 User Manual

4. Configure the settings described in the following table.
Advanced Wireless Settings
Wireless Access
Point
Advanced
Configuration
WPS Settings
Wireless Access List Set up Access List
5. Click the Apply button.
Your changes are saved.

MAC Filtering

By default, the modem router allows any connected computer to access the Internet. The
MAC Filtering screen lets you block specific computers, based on their MAC addresses, from
access to the Internet on selected days and times.
To use MAC filtering to block Internet access for a specific computer:

1. Type http://192.168.0.1 in the address field of your web browser.
N450 WiFi Cable Modem Router Model N450/CG3000Dv2
Enable
• Fragmentation Threshold
• CTS/RTS Threshold
• Preamble Mode
Disable router's PIN
Keep Existing Settings
Advanced Settings
Description
By default this check box is selected so that the
modem router works as a wireless access point. You
can turn off the wireless radio to disable access
through this device, which can be helpful for
configuration, network tuning, or troubleshooting
activities.
The default settings for these fields usually work fine.
Change them only if you have a specific reason for
doing so.
Selecting this check box disables the PIN that WPS
clients use to connect to the modem router with the
PIN method. Normally this check box is cleared,
which is the default setting.
If a WPS client is added, the modem router
automatically selects this check box. When the Keep
Existing Settings check box is selected, the SSID
and wireless security settings remain the same when
more WPS clients are added.
Access control is disabled by default so that any
computer that is configured with the correct SSID
can connect.
53