Trek N300 Travel Router and Range Extender PR2000
5.
Select BASIC > ReadySHARE.
6.
Click the Edit button.
7.
To specify access to the USB storage device, provide the following information:
•
Network Device Name. The default is readyshare. This name is the name used to
access the USB device connected to the Trek.
•
Workgroup. If you are using a Windows workgroup rather than a domain, the
workgroup name displays here. The name works only in an operating system that
supports NetBIOS, such as Microsoft Windows.
•
Access Method. Select the check boxes for the access methods that you want:
-
Network Neighborhood/MacShare. Enabled by default.
-
HTTP. Enabled by default. You can type readyshare.routerlogin.net/shares to
access the USB drive.
USB Port
75