NETGEAR Trek PR2000 User Manual page 22

Trek N300 Travel Router and Range Extender PR2000
The Wireless as WAN screen displays, which shows the available wireless networks.
7. Make sure that the Extend my current wireless router's range check box is selected.
8. Select the wireless network that you want to connect to and enter the related security
information for that wireless network.
9. (Optional) To be able to use these settings again without having to reenter them, select the
To save a name for profile check box.
10. In the field provided, enter a name for the profile.
11. Click the Apply button.
The Trek is configured as a WiFi bridge after a two-minute setup process.
12. (Optional) Connect your wireless devices to the Trek.
For more information, see
13. (Optional) To use a USB device, connect it to the USB port of the Trek.
A USB device can be a USB storage drive or a USB printer. When the Trek is plugged into
the wall, the USB port can also be used as a cell phone charger. For more information,
see Enhance Your Local Network
Add Wireless Devices or Computers to Your Trek
on page 71.
Hardware Setup
22
on page 32.