RocketFish RF-TVMLPTO2V2 Assembly Manual page 11

RF-TVMLPT02V2 TV Wall Mount
STEP 5 - Option 2: Attaching the mounting hardware to TVs with irregular or
obstructed backs
1 Align the TV brackets (B and C) with the screw holes on the back of the TV.
2 Place spacers (I) behind the TV brackets and washers (G or H) over the holes in the TV bracket, then insert the
screws (F, K., M, or P) through the washers, TV bracket, and spacers. Make sure the brackets are level.
3 Tighten the screws until they are snug against the TV bracket. Do not over tighten.
NOTE: If possible, TV brackets should be level and centered on the back of your TV.
You'll need
Screws
OR
F (4)
OR
P (4)
OR
K (4)
M (4)
Phillips screwdriver
Need help? Call 800-620-2790
Level TV brackets (B and C)
Washers
OR
H (4)
G (4)
Spacers
I (4)
11