Sending Sms (Text Messages); Writing/Sending Sms; Interrupted - Gigaset SL400A Manual

Sending SMS
(text messages)
Your phone is delivered ready to send SMS
messages immediately.
Prerequisites:
u
Calling Line Identification is enabled for
your phone line.
u
Your network provider supports SMS on
the fixed line network (information on
this can be obtained from your network
provider).
u
You are registered with your service pro-
vider to send and receive SMS.
u
To receive SMS messages, you must be
registered with your service provider. This
occurs automatically when you send your
first SMS.
Please note
If your phone is connected to a PABX,
¢
please read ( page 49).

Writing/sending SMS

Writing an SMS
Ë
¢
v
Mailbox 2 Select mailbox if necessary and
§OK§
press
~
Enter mailbox PIN if necessary
and press
New SMS Select and press
~
Write an SMS.
.
§OK§
.
§OK§
.

Sending SMS (text messages)

Please note
u
For instructions on entering text and
special characters, please see
page 84.
u
An SMS may contain up to 612 char-
acters. If there are more than 160
characters, the SMS is sent as a linked
SMS (up to 4 SMS messages with 153
characters each). The top right of the
display shows how many characters
are still available and which part of a
linked SMS is currently being written.
Sending an SMS
c
Press the talk key
Or:
§Options§
Press the display key.
Send Select and press
SMS Select and press
/ s
~
Select number with access code
(even if you are in that area)
from the directory or enter
directly. For sending SMS mes-
sages to an SMS mailbox: add
the mailbox ID to the end of the
number.
§Send§
Press the display key. The SMS is
sent.
Please note
u
If you are interrupted by an external
call while writing an SMS, the text is
automatically saved in the draft SMS
list.
u
If the memory is full, or if the SMS
function on the base is being used by
another handset, the operation is can-
celled. A relevant message appears in
the display. Delete SMS messages you
no longer require or send the SMS
later.
§OK§
.
§OK§
.
43