Installing The Base And Charger - Gigaset SL400A Manual

First steps

Installing the base and charger

The base and charger are designed for use in dry rooms in a temperature range of
+5°C to +45°C.
¤
Install the base on a level, non-slip surface at a central point in the building or
mount the base on the wall (
Please note
Pay attention to the range of the base.
This is up to 300 m in unobstructed outdoor areas and up to 50 m inside build-
ings. The range is reduced when Eco Mode (
The phone's feet do not usually leave any marks on surfaces. However, due to the
multitude of different varnishes and polishes used on today's furnishings, the
occurrence of marks on the surfaces cannot be completely ruled out.
Please note:
u
Never expose the telephone to the influence of heat sources, direct sunlight or
other electrical devices.
u
Protect your Gigaset from moisture, dust, corrosive liquids and fumes.
10
¢
page 90).
¢
page 58) is activated.