Sony REVDN700-2 Instruction Manual page 13

Poly (Polygon)
It you select one of "a,b,c,d", the active point is displayed.
Move the point with 4-arrow keys. Press [ENTER] key is to finish edit point.
NOTE:
* For more than 180 of interior angle is not permitted.
Line: Select Start/End Point. It you select one of start/end,
the active point is displayed. Move the point with 4-arrow keys.
Press [ENTER] key is to finish edit point.
Posi: Adjust area position with 4-arrow keys.
- MD Event
NOTE:
* The result of MD event detection can be inaccuracy.
Zone: Configurations for various zone events.
Following area, possible events are different.
Output Select: Press [Enter] key on icon to watching event, popup box appear.
Alarm: Trigger alarm to output port.
Communication: Event string sends on RS-485
Screen: Display on screen.
Back: return to previous menu.
, : Send event to counting machine. (OFF : No Effect /
INC : Increment counting value. / DEC : Decrement counting value)
NOTE:
* The result of counting value can be inaccuracy.
Screen: Printed event at bottom side by side scrolling.
Icon Subject
Motion
Motion Inside
Move Into
Appear Inside
Move Out
Appeared &
Move Out
Disappear
Inside
Moved In &
Disappear
Loitering
Range
Motion occurred.
Rect,Poly,Line
Motion occurred in the area.
Rect, Poly
Object on outside moves into the area.
Rect, Poly
Object which appeared inside.
Rect, Poly
*) In Simple mode is not supported.
Object moves out.
Rect, Poly
*) Please don't use as a signal for video
recording start.
Object which appeared inside, and moves out
Rect, Poly
*) Please don't use as a signal for video
recording start.
*) In Simple mode is not supported.
Object disappeared inside.
Rect, Poly
*) Please don't use as a signal for video
recording start.
*) In Simple mode is not supported.
Objects from outside, move into inside, and
Rect, Poly
disappears inside.
*) Please don't use as a signal for video
recording start.
*) In Simple mode is not supported.
Detect moving object within the zone during a
Rect, Poly
time.
13