Processor Front Panel Controls - Dwin TransVision 4 User Manual

Processor Front Panel Controls

The TransVision 4 Processor front panel controls include:
™
• A POWER button to turn the system On or Off.
• An indicator light (LED) which is lit when the unit is turned on and blinks when
a valid IR command is received.
— When the LED is DARK the AC power to the unit is turned off.
— When the LED is flashing On and Off, power is connected and the unit is
in the standby mode.
— When the LED is on the unit is powered on.
— When the LED is flashing fast, this indicates that the lamp failed to ignite.
If the lamp failed to ignite, the lamp may either be burned or hot. In case
the lamp is hot, wait approximately 1 minute to turn the unit on.
• An IR Receiver Window
• A MENU button to display the Main menu or to return to the previous
menu.
▲ ▼
• Up and down FUNCTION buttons to sequences through the on-screen
menu options.
◀ ▶
• Left and right
menu.
VALUE buttons to adjust values or to move to a sub-
6