Programming URC-100 Remote Control
to Operate the TransVision
4 Processor
™
The TransVision
4 System is shipped with a factory pre-programmed remote
™
control.
1. Press the TV device button.
2. Press and hold both the SHIFT and ENTER buttons for 3 seconds. The display
will blink "Set" and then "DWIN."
3. Enter the TransVision
4 brand code: 177
™
4. Press the LIGHT button on the right hand side to complete the programming.
To operate other audio and video devices refer to the URC-100 Operating
Manual.
11